Nextone Grey 24×24 2CM Porcelain Paver – Natural
Bring modern outdoor style to life with the Nextone Grey 24×24 2CM Porcelain Paver. Its versatile grey tone and natural finish create a clean, contemporary foundation that pairs easily with a range of landscape and architectural palettes. The large 24×24 format supports sleek, balanced layouts in open-air spaces.
Engineered in a robust 20 mm (2CM) thickness and made from porcelain, this paver delivers durable, low‑maintenance performance outdoors. Frost resistance supports year‑round reliability, while rectified edges help achieve precise lines and consistent joint spacing. Designed for exterior projects, it’s a smart choice for patios, walkways, rooftop terraces, and more.
Each box covers approximately 7.75 square feet, making planning and takeoffs straightforward for both small upgrades and larger outdoor living areas.
Features
- 24×24 large-format 20 mm (2CM) porcelain paver
- Grey color in a Natural finish
- Rectified edges for precise lines and consistent joints
- PEI 5 wear rating for robust surface durability
- Frost resistant for reliable year-round outdoor use
- Low maintenance and easy to clean
- Approx. 7.75 sq ft coverage per box
- Suitable for exterior installations when installed per industry standards
Recommended Applications
- Patios
- Walkways
- Garden Paths
- Outdoor Kitchens
- Outdoor Living Areas
- Rooftop Terraces
- Courtyards
- Balconies
Installation Guide – Nextone Grey 24×24 2CM Porcelain Paver – Natural
Important Advisory
Always follow the paver manufacturer’s instructions, local building codes, substrate and drainage requirements, and current industry standards (e.g., TCNA/ANSI) before starting any project.
Step 1: Layout & Planning
- Dry‑lay several pavers to review shade, size calibration, and layout before installation.
- Plan patterns and cuts to maintain balanced joint lines and avoid narrow sliver cuts at edges and borders.
- Establish control lines with chalk or a laser to keep courses straight and to verify proper slope for drainage away from structures.
Step 2: Paver Installation
- Install 24×24 porcelain pavers over a properly prepared and compacted sand setting bed, a bonded mortar bed, or an adjustable pedestal system approved for 2CM porcelain.
- Verify adequate slope and positive drainage per local codes and site conditions.
- Maintain consistent joint spacing (typically about 1/8"–3/16") using appropriate spacers.
- Seat each paver with a rubber mallet to ensure full support without chipping the rectified edges or surface.
- Check alignment, flatness, and joint consistency frequently; incorporate movement joints per industry standards and project specifics.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Fully support the paver during cutting to minimize edge chipping and ensure accuracy.
- Measure carefully and mark clearly before each cut; use appropriate PPE.
- Avoid dry cutting where possible and control dust per safety regulations.
Step 4: Joint Filling
- For sand‑set installations, fill joints with polymeric sand or another jointing material approved for porcelain pavers and exterior use.
- For mortar‑set installations, use an exterior‑grade grout per manufacturer guidance; clean as you go to prevent haze.
- On pedestal systems, follow the pedestal and spacer manufacturer’s recommendations for joint treatment and perimeter restraint.
- Remove excess jointing material from the surface before curing and perform a final clean per product instructions.
Step 5: Cleaning & Maintenance
- Clean routinely with water and a pH‑neutral cleaner using non‑abrasive tools.
- Avoid acidic, bleach‑based, or abrasive products that may harm surrounding materials or finishes.
- Promptly remove construction residues and grout haze following manufacturer recommendations.
- Porcelain pavers generally do not require sealing; inspect joints, edges, and perimeter restraints periodically and maintain as needed.
Disclaimer
Shade and size variation can occur between production runs; verify caliber and dye lot before installation. Inspect all materials prior to install—installed materials are considered accepted. Professional installation is recommended to ensure code compliance, structural integrity, and long‑term performance.
