Nextone Dark 24×24 2CM Porcelain Paver – Natural
The Nextone Dark 24×24 2CM Porcelain Paver brings a sophisticated, contemporary mood to outdoor spaces with its deep, versatile tone and understated natural finish. The large-format square profile creates clean visuals that suit modern patios and gathering areas.
Engineered in a robust 20 mm (2CM, approx. 3/4 in) thickness, this porcelain paver is designed for outdoor performance. Rectified edges help achieve crisp, consistent joint lines, while the low‑maintenance surface and frost resistance support reliable, year‑round use when installed to industry standards.
With a PEI 5 wear rating and durable porcelain construction, Nextone Dark stands up to everyday life in open‑air environments. Each box covers approximately 7.75 sq ft, making it straightforward to estimate materials and plan your layout.
Features
- 24×24 large-format 2CM (approx. 3/4 in) porcelain paver
- Dark color with a Natural finish
- Rectified edges for tight, consistent joint lines
- PEI 5 wear rating for robust surface durability
- Frost resistant for reliable year‑round outdoor use
- Low maintenance and easy to clean
- Approx. 7.75 sq ft per box coverage
- Part of the Happy Floors Nextone collection
Recommended Applications
- Patios
- Walkways
- Garden Paths
- Courtyards
- Outdoor Kitchens
- Outdoor Living Areas
Installation Guide – Nextone Dark 24×24 2CM Porcelain Paver – Natural
Important Advisory
Always follow the manufacturer’s instructions, local building codes, substrate and drainage requirements, and current industry standards (e.g., TCNA/ANSI) for 2CM porcelain pavers before starting any project.
Step 1: Layout & Planning
- Dry‑lay pavers to review shade, size calibration, and layout prior to install.
- Plan patterns and cuts to balance joints and avoid narrow slivers at perimeters.
- Establish control lines to maintain straight courses and correct slope for drainage away from structures.
- Confirm finished elevations, thresholds, and edge restraints before installation begins.
Step 2: Paver Installation
- Install 24×24 porcelain pavers over a properly prepared and compacted sand setting bed, a bonded mortar bed, or an adjustable pedestal system approved for 2CM porcelain, where permitted.
- Verify adequate slope and drainage per local codes and site conditions.
- Maintain consistent joint spacing (typically about 1/8"–3/16") using appropriate spacers.
- Seat each paver with a rubber mallet to ensure full support and protect the rectified edges.
- Check alignment, flatness, and joint consistency frequently; incorporate movement joints per standards and project conditions.
Step 3: Cutting
- Use a wet saw with a premium diamond blade rated for porcelain.
- Support pavers fully during cutting to minimize edge chipping and ensure accuracy.
- Measure and mark carefully before every cut; wear appropriate PPE.
- Avoid dry cutting when possible and control dust per safety regulations.
Step 4: Joint Filling
- For sand‑set installations, fill joints with polymeric sand or a jointing product approved for porcelain pavers and exterior use.
- For mortar‑set installations, use an exterior‑grade grout per manufacturer guidance; clean as you go to reduce haze.
- On pedestal systems, follow pedestal and spacer manufacturer recommendations for joint treatment and perimeter restraint.
- Remove all excess jointing material from the surface before curing and perform a final clean after installation.
Step 5: Cleaning & Maintenance
- Clean routinely with water and a pH‑neutral cleaner using non‑abrasive tools.
- Avoid acidic, bleach‑based, or abrasive products that may harm surrounding materials or finishes.
- Promptly remove construction residues and grout haze per manufacturer recommendations.
- Porcelain pavers generally do not require sealing; inspect and maintain joints, borders, and edge restraints periodically.
Disclaimer
Shade and size variation can occur between production runs; verify caliber and dye lot before installation. Inspect all materials prior to install—installed materials are considered accepted. Professional installation is recommended to ensure code compliance, structural integrity, and long‑term performance.
