X-Rock Grey 24×24 2CM Porcelain Paver – Natural
Bring refined outdoor style to life with the X-Rock Grey 24×24 2CM Porcelain Paver. Its versatile grey tone and natural finish create a clean, contemporary backdrop that pairs effortlessly with modern landscape designs and classic architecture alike. The large-format 24×24 size and rectified edges deliver crisp lines and balanced joint patterns for visually consistent installations.
Engineered in a robust 20 mm (2CM) thickness, this porcelain paver is built for exterior performance. Frost resistance supports year-round reliability in changing climates, while the low-maintenance surface simplifies routine care. With a PEI 4 wear rating and approximately 7.75 sq ft per box coverage, X-Rock Grey is a smart, durable choice for patios, walkways, terraces, and other open-air living areas when installed to industry standards.
Designed for straightforward layouts or creative patterns, the rectified edges help achieve tight, even joints and a polished finished look. Whether you’re shaping an intimate courtyard or a spacious rooftop terrace, this paver offers lasting durability and a timeless neutral palette.
Features
- 24×24 large-format 20 mm (2CM) porcelain paver
- Grey color in a Natural finish
- Rectified edges for tight, consistent joints
- PEI 4 wear rating for durable performance
- Frost resistant for year-round outdoor use
- Low maintenance and easy to clean
- Approx. 7.75 sq ft per box coverage
- Suitable for exterior applications when installed per standards
Recommended Applications
- Patios
- Walkways
- Garden Paths
- Outdoor Kitchens
- Outdoor Living Areas
- Rooftop Terraces
- Courtyards
Installation Guide – X-Rock Grey 24×24 2CM Porcelain Paver – Natural
Important Advisory
Always follow the paver manufacturer’s instructions, local building codes, substrate and drainage requirements, and current industry standards (e.g., TCNA/ANSI) before beginning any installation.
Step 1: Layout & Planning
- Dry-lay pavers to review shade variation, size calibration, and the overall layout prior to installation.
- Plan patterns and cuts to achieve balanced joints and avoid narrow sliver cuts at edges.
- Establish control lines with chalk or a laser to maintain straight courses and proper slope for drainage away from structures.
- Confirm finished elevations, edge restraints, and transitions to adjoining surfaces before work begins.
Step 2: Paver Installation
- Install 24×24 porcelain pavers over a properly prepared and compacted sand setting bed, a suitable bonded mortar bed, or an adjustable pedestal system approved for 2CM porcelain.
- Verify adequate slope and drainage in accordance with local codes and site conditions.
- Maintain consistent joint spacing (commonly about 1/8"–3/16") using appropriate spacers.
- Seat each paver with a rubber mallet to ensure full support and to protect the rectified edges from chipping.
- Check alignment, flatness, and joint consistency frequently, and incorporate movement joints per standards and project conditions.
Step 3: Cutting
- Use a wet saw fitted with a premium diamond blade rated for porcelain.
- Support the paver fully during cutting to minimize edge chipping and improve accuracy.
- Measure carefully and mark clearly before cutting; wear appropriate PPE.
- Avoid dry cutting when possible and control dust per safety regulations.
Step 4: Joint Filling
- For sand-set installations, fill joints with polymeric sand or another jointing material approved for porcelain pavers and exterior use.
- For mortar-set installations, use an exterior-grade grout per manufacturer guidance; clean as you go to prevent haze.
- On pedestal systems, follow the pedestal and spacer manufacturer’s recommendations for joint treatment and perimeter restraint.
- Remove all excess jointing material from the surface before curing and complete the final cleaning per product instructions.
Step 5: Cleaning & Maintenance
- Clean routinely with water and a pH-neutral cleaner using non-abrasive tools.
- Avoid acidic, bleach-based, or abrasive products that may harm surrounding materials or finishes.
- Promptly remove construction residues and any grout haze following manufacturer recommendations.
- Porcelain pavers generally do not require sealing; inspect joints, edge restraints, and borders periodically and maintain as needed.
Disclaimer
Shade and size variation can occur between production runs; verify caliber and dye lot before installation. Inspect all materials prior to install—installed materials are considered accepted. Professional installation is recommended to ensure code compliance, structural integrity, and long-term performance.
