Azuma AV 24×24 2CM Porcelain Paver – Natural
Azuma AV 24×24 2CM Porcelain Paver – Natural delivers a clean, contemporary foundation for outdoor living. The natural finish keeps the look refined and understated, while the large 24×24 format and rectified edges support crisp, balanced layouts.
Engineered at a robust 20 mm (3/4 in.) thickness, this porcelain paver is built for year‑round performance. With DCOF >0.42 and frost resistance, it’s designed to handle the elements across patios, walkways, rooftop terraces, courtyards, and other open‑air spaces.
Low‑maintenance porcelain construction and a PEI 5 wear rating make everyday care simple and durable use routine. Each box covers approximately 7.75 sq ft, helping streamline estimating and ordering.
Features
- 24×24 large-format 20 mm (2CM) porcelain paver
- Natural finish for a refined outdoor look
- Rectified edges for clean, consistent joints
- DCOF >0.42
- PEI 5 wear rating for durable performance
- Frost resistant for year‑round outdoor use
- Low maintenance and easy to clean
- Approx. 7.75 sq ft per box coverage
Recommended Applications
- Patios
- Walkways
- Garden Paths
- Outdoor Kitchens
- Outdoor Living Areas
- Rooftop Terraces
- Courtyards
- Balconies
Installation Guide – Azuma AV 24×24 2CM Porcelain Paver – Natural
Important Advisory
This guidance applies to the installation of Azuma AV 24×24 2CM Porcelain Pavers in a Natural finish. Always follow manufacturer instructions, local building codes, substrate and drainage requirements, and current industry standards (e.g., TCNA/ANSI) before starting any project.
Step 1: Layout & Planning
- Dry‑lay pavers to review shade, size calibration, and layout before installation.
- Plan patterns and cuts to achieve balanced joints with no narrow slivers along edges.
- Establish control lines with chalk or a laser to maintain straight courses and proper slope for drainage away from structures.
Step 2: Paver Installation
- Install 24×24 porcelain pavers over a properly prepared and compacted sand setting bed, a bonded mortar bed, or an adjustable pedestal system approved for 2CM porcelain.
- Confirm adequate slope and drainage per local codes and site conditions.
- Maintain consistent joint spacing (typically about 1/8"–3/16") using appropriate spacers.
- Seat each paver with a rubber mallet to ensure full support, avoiding damage to the rectified edges or surface.
- Check alignment, flatness, and joint consistency frequently, and incorporate movement joints per standards and site conditions.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Support the paver fully during cutting to minimize edge chipping and ensure accuracy.
- Measure carefully and mark clearly before every cut; wear appropriate PPE.
- Avoid dry cutting where possible and control dust per safety regulations.
Step 4: Joint Filling
- For sand‑set installations, fill joints with polymeric sand or another jointing product approved for porcelain pavers and exterior use.
- For mortar‑set installations, use an exterior‑grade grout per manufacturer guidance; clean as you go to prevent haze.
- On pedestal systems, follow the pedestal and spacer manufacturer’s recommendations for joint treatment and perimeter restraint.
- Remove all excess jointing material from the surface before curing and final cleaning.
Step 5: Cleaning & Maintenance
- Clean routinely with water and a pH‑neutral cleaner using non‑abrasive tools.
- Avoid acidic, bleach‑based, or abrasive products that may harm adjacent materials or finishes.
- Promptly remove construction residues and grout haze following manufacturer recommendations.
- Porcelain pavers generally do not require sealing; inspect joints, borders, and perimeter restraints periodically and maintain as needed.
Disclaimer
Shade and size variation can occur between production runs; verify caliber and dye lot before installation. Inspect all materials prior to install—installed materials are considered accepted. Professional installation is recommended to ensure code compliance, structural integrity, and long‑term performance.
