Berwyn Bluestone 24×24 2CM Porcelain Paver – Natural
Inspired by the character of classic bluestone, the Happy Floors Berwyn Bluestone 24×24 2CM Porcelain Paver sets a refined, modern tone for outdoor spaces. The natural finish brings an authentic stone look, while the large-format square design helps create clean, balanced lines across patios, terraces, and garden walkways.
Built in a robust 20 mm (2CM) thickness and frost resistant, this porcelain paver is engineered for dependable outdoor performance with low-maintenance ease. Rectified edges support precise, consistent joints, and PEI 4 wear resistance adds practical durability. Review site conditions and safety requirements for wet areas; this product carries a DCOF of 0.42.
Approximate coverage is 7.75 sq ft per box; confirm actual needs based on layout and cuts.
Features
- 24×24 large-format 20 mm (2CM) porcelain paver
- Bluestone-inspired color in a Natural finish
- Rectified edges for precise, consistent joints
- PEI 4 wear rating for durable performance
- DCOF 0.42 (verify suitability for specific wet-area needs)
- Frost resistant for year-round outdoor use
- Low maintenance and easy to clean
- Approx. 7.75 sq ft per box coverage
Recommended Applications
- Patios
- Walkways
- Garden Paths
- Outdoor Kitchens
- Outdoor Living Areas
- Courtyards
- Rooftop Terraces
- Entryways
Installation Guide – Berwyn Bluestone 24×24 2CM Porcelain Paver – Natural
Important Advisory
Always follow the manufacturer’s instructions, local building codes, substrate and drainage requirements, and current industry standards (e.g., TCNA/ANSI) for 2CM porcelain pavers.
Step 1: Layout & Planning
- Dry-lay pavers to review shade, size calibration, and overall layout prior to installation.
- Plan patterns and cuts to achieve balanced joints and avoid narrow sliver cuts at edges or borders.
- Establish control lines with chalk or a laser and confirm proper slope for drainage away from structures.
Step 2: Paver Installation
- Install 24×24 porcelain pavers over a properly prepared and compacted sand setting bed, a bonded mortar bed, or an adjustable pedestal system rated for 2CM porcelain.
- Verify slope and drainage comply with local codes and site conditions.
- Maintain consistent joint spacing (commonly about 1/8″–3/16″) using appropriate spacers.
- Seat each paver with a rubber mallet to ensure full support without damaging the rectified edges or surface.
- Check alignment, flatness, and joint consistency frequently; incorporate movement joints per standards and environmental conditions.
Step 3: Cutting
- Use a wet saw with a premium diamond blade rated for porcelain.
- Support the paver fully during cutting to minimize chipping along rectified edges.
- Measure carefully and mark clearly before each cut; wear appropriate PPE.
- Avoid dry cutting whenever possible and control dust per safety regulations.
Step 4: Joint Filling
- For sand-set installations, fill joints with polymeric sand or another jointing material approved for porcelain pavers and outdoor exposure.
- For mortar-set installations, use an exterior-grade grout per manufacturer guidance; clean as you go to limit haze.
- For pedestal systems, follow the pedestal and spacer manufacturer’s recommendations for joint spacing and perimeter restraint.
- Remove excess jointing material from the surface before curing and complete a final clean per product directions.
Step 5: Cleaning & Maintenance
- Clean routinely with water and a pH-neutral cleaner using non-abrasive tools.
- Avoid acidic, bleach-based, or abrasive products that may affect surrounding materials or finishes.
- Promptly remove construction residues and any grout haze following manufacturer recommendations.
- Porcelain pavers generally do not require sealing; inspect joints, edges, and borders periodically and maintain as needed.
Disclaimer
Shade and size variation can occur between production runs; verify caliber and dye lot before installation. Inspect all materials prior to install—installed materials are considered accepted. Professional installation is recommended to ensure code compliance, structural integrity, and long-term performance.
