Agathos White 24×24 2CM Porcelain Paver – Natural
Agathos White 24×24 2CM Porcelain Paver brings a fresh, versatile white tone to outdoor spaces, creating a clean, modern canvas for patios and open‑air living. The natural finish pairs easily with a wide range of landscape and architectural styles, while the 24×24 large format helps achieve balanced, contemporary layouts.
Engineered in a robust 2CM (3/4 inch) thickness, this porcelain paver is built for outdoor performance. Frost resistance supports year‑round reliability, rectified edges promote precise lines and consistent joints, and low‑maintenance porcelain construction simplifies upkeep. With a PEI 4 wear rating, it’s a durable choice for well‑planned exterior projects when installed to industry standards.
Features
- 24×24 large-format 2CM (3/4 inch) porcelain paver
- White color in a Natural finish
- Rectified edges for crisp, consistent lines
- PEI 4 wear rating for durable performance
- Frost resistant for year‑round outdoor use
- Low maintenance and easy to clean
- Approx. 7.75 sq ft per box coverage
- Suitable for exterior applications when installed per standards
Recommended Applications
- Patios
- Walkways
- Garden Paths
- Outdoor Kitchens
- Outdoor Living Areas
- Courtyards
- Rooftop Terraces (with appropriate pedestal systems)
Installation Guide – Agathos White 24×24 2CM Porcelain Paver – Natural
Important Advisory
This guidance applies to the installation of Agathos White 24×24 2CM Porcelain Pavers. Always follow manufacturer instructions, local building codes, substrate and drainage requirements, and current industry standards (e.g., TCNA/ANSI) before starting any project.
Step 1: Layout & Planning
- Dry‑lay multiple pavers to review shade, size calibration, and layout before installation.
- Plan patterns and cuts to achieve balanced joints and avoid sliver cuts along edges.
- Establish reference lines with chalk or a laser to maintain straight courses and proper slope for drainage.
Step 2: Paver Installation
- Install 24×24 porcelain pavers over a properly prepared and compacted sand setting bed, a bonded mortar bed, or an adjustable pedestal system approved for 2CM porcelain.
- Confirm adequate slope and drainage away from structures per local codes and site conditions.
- Maintain consistent joint spacing (commonly about 1/8"–3/16") using appropriate spacers or pedestal tabs.
- Seat each paver gently with a rubber mallet to ensure full support without chipping the rectified edges or surface.
- Verify alignment, flatness, joint consistency, and incorporate movement joints per standards and environmental conditions.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Support the paver fully during cutting to reduce edge chipping and ensure accuracy.
- Measure carefully and mark clearly before every cut; wear appropriate PPE.
- Avoid dry cutting when possible and control dust per safety regulations.
Step 4: Joint Filling
- For sand‑set installations, fill joints with polymeric sand or another jointing material approved for porcelain pavers and exterior use.
- For mortar‑set installations, use an exterior‑grade grout per manufacturer guidance; clean as you go to prevent haze.
- On pedestal systems, follow pedestal and spacer manufacturer recommendations for joint treatment and perimeter restraint.
- Remove all excess jointing material from the surface before curing and perform a final clean once set.
Step 5: Cleaning & Maintenance
- Clean routinely with water and a pH‑neutral cleaner using non‑abrasive tools.
- Avoid acidic, bleach‑based, or abrasive products that may harm surrounding materials or finishes.
- Promptly remove construction residues and grout haze following manufacturer recommendations.
- Porcelain pavers generally do not require sealing; inspect joints, borders, and edge restraints periodically and maintain as needed.
Disclaimer
Shade and size variation can occur between production runs; verify caliber and dye lot before installation. Inspect all materials prior to install—installed materials are considered accepted. Professional installation is recommended to help ensure code compliance, structural integrity, and long‑term performance.
