Carrara White Tile 12″x24″ Honed – Natural Marble with Icy Veining
Timeless Sophistication in White Marble
The Carrara White Tile 12″x24″ Honed offers a refined balance of classic beauty and modern style. Made from natural marble, this tile showcases soft white tones with subtle icy veining, creating a serene backdrop for any space. Because of its honed finish, it adds a smooth, non-reflective texture that feels warm and organic.
Moreover, the 12″x24″ format makes it perfect for walls, floors, or vertical layouts. Whether you’re updating a bathroom, kitchen, or a commercial space, this tile brings a sense of calm and elegance. Its straight edges allow for clean lines and easier alignment during installation.
Key Features – Carrara White Tile
- Material: Premium natural Carrara marble
- Color: Soft white with delicate icy veining
- Finish: Honed – smooth, matte surface
- Tile Size: 12″x24″ (30.5×61 cm)
- Thickness: 0.47″ (1.2 cm)
- Edge: Straight edge for seamless layout
- Applications: Indoor wall and floor use – ideal for bathrooms, kitchens, and living spaces
Why Choose Carrara White Marble?
This tile is both elegant and practical. Its neutral palette pairs well with a wide range of interiors, from traditional to contemporary. Additionally, Carrara marble is valued for its timeless character, making it a smart and lasting investment.
Installation Guide – Step by Step
Step 1: Surface Preparation – Create a Flat, Clean Base
- Ensure substrate is structurally sound, clean, and completely dry.
- Use a 10-ft straightedge to check for levelness—variation should not exceed 1/8″.
- Apply a self-leveling compound where needed to correct dips or rises.
- Use a waterproofing membrane for wet areas such as bathrooms or shower walls.
Step 2: Layout Planning – Maintain Vein Flow
- Establish centerlines and layout grid for balanced cuts and alignment.
- Dry-lay tiles to preview Carrara veining and blend pieces for natural flow.
- Pull tiles from multiple boxes to ensure consistent tone across the area.
- Use **1/16″–1/8″ grout joints** with straight-edged tiles for a seamless appearance.
Step 3: Mortar Application – White Thin-Set Required
Recommended Products:
- Mapei Ultraflex LFT White
- Laticrete 254 Platinum White
- Ardex X77 White
Instructions:
- Spread adhesive with a 1/2″ square-notched trowel for full coverage.
- Back-butter each tile to enhance bond strength and avoid hollow spots.
- Work in small sections to maintain open time and tile adjustability.
Step 4: Cutting & Fitting – Preserve Clean Edges
- Use a wet saw with a diamond blade suitable for natural stone.
- Polish cut edges with a stone file or hand pad if exposed.
- Dry-fit all pieces to confirm sizing and alignment before setting permanently.
Step 5: Setting Tiles – Precision is Key
- Use a leveling system to minimize lippage between large-format tiles.
- Set tiles using consistent pressure and maintain grout spacing with spacers.
- Clean off any mortar from the honed surface immediately with a damp sponge.
- Allow thin-set to cure for 24 hours before grouting.
Step 6: Grouting & Sealing – Enhance & Protect
- Pre-seal honed Carrara marble with a penetrating sealer before grouting.
- Use non-sanded grout to avoid surface abrasion.
- Grout diagonally with a rubber float and remove excess immediately.
- Buff surface after 20–30 minutes to clear any haze.
- Seal the surface again after grout cures (typically 72 hours).
Maintenance Tips – Long-Term Beauty
- Clean using pH-neutral, stone-safe products only.
- Wipe up acidic spills (wine, lemon juice) immediately to avoid etching.
- Reseal every 6–12 months based on location and usage.
- Use felt pads or rugs in high-traffic zones to reduce wear.
Shipping & Packaging
Each Carrara White 12″ x 24″ Honed Tile is packaged with protective layers to prevent breakage. Inspect all tiles before installation to ensure tone and finish consistency.
Important Note
As a natural marble, Carrara may contain variation in veining and tone. Dry-lay tiles and blend prior to installation. Stonemarket USA is not liable for improper installation or natural differences.
