Dolomite Tile 12″x24″ Honed – White Marble with Beveled Edge
Timeless Sophistication in a Clean, Matte Finish
The Dolomite Tile 12″x24″ Honed offers a sleek and natural appeal. Made from fine white dolomite marble, this tile features soft veining and a smooth honed surface that reduces glare while enhancing texture. Its beveled edges add a subtle architectural detail, making it a refined option for walls in bathrooms, kitchens, or commercial spaces.
Thanks to its neutral color and versatile size, this tile pairs beautifully with both traditional and modern interiors. Moreover, the honed finish softens the stone’s appearance, creating a serene atmosphere ideal for spa-inspired designs or minimalist aesthetics. Its 12″x24″ format also minimizes grout lines, helping surfaces appear more seamless and expansive.
Key Features – 12″x24″ Dolomite Honed Tile
- Material: Natural White Dolomite Marble
- Finish: Honed – matte, non-reflective surface
- Edge: Beveled for subtle depth and elegance
- Tile Size: 12″x24″ (30.5 x 61 cm)
- Thickness: 0.4″ (1 cm)
- Application: Indoor wall use – bathrooms, kitchens, backsplashes, and accent areas
Why Choose This Tile?
If you’re aiming for a clean, upscale look that isn’t overly shiny, this honed dolomite tile is an ideal solution. Its crisp white tone works with nearly any palette. In addition, the beveled edge brings a tailored detail to your installation. Durable and easy to maintain, it’s perfect for projects where both beauty and practicality matter.
Installation Guide – Step by Step
Step 1: Surface Preparation – Solid and Level
- Ensure the substrate is structurally sound, dry, and free from dust, oil, or other contaminants.
- Check for flatness with a long level. Dolomite tiles require a flat surface to prevent lippage due to their size and straight edge.
- Apply a waterproofing membrane in wet areas such as bathrooms and kitchens.
- If necessary, use a self-leveling compound to eliminate dips and high spots.
Step 2: Layout Planning – Clean Geometry and Flow
- Find the center of your surface area and snap chalk lines to guide your layout.
- Dry-lay several tiles to observe veining and natural color movement. Blend tiles from different boxes to balance the variation.
- Maintain grout joints between **1/16″ and 1/8″** for a refined look with honed, straight-edge tiles.
- Avoid placing small sliver cuts along walls; adjust layout accordingly.
Step 3: Adhesive Application – Use White Thin-Set
Recommended Thin-Set Mortars:
- Mapei Ultraflex LFT White
- Laticrete 254 Platinum White
- Ardex X77 White
Instructions:
- Spread thin-set using a 1/2″ square-notched trowel to ensure even coverage.
- Back-butter each tile to ensure full bond and avoid hollow spots.
- Apply thin-set in small areas to avoid drying before tile placement.
Step 4: Cutting & Fitting – Sharp and Clean
- Use a wet saw with a continuous-rim diamond blade to cut Dolomite without chipping.
- Double-check measurements and test-fit each tile before final placement.
- Smooth visible cut edges with a marble file or polishing pad.
Step 5: Setting Tiles – Keep It Level
- Use a leveling system to ensure flush installation and prevent lippage.
- Align tiles using spacers and tap gently with a rubber mallet for accurate setting.
- Wipe off any thin-set from the tile surface immediately—especially important on honed white marble to avoid staining.
- Allow mortar to cure for 24 hours before grouting.
Step 6: Grouting & Sealing – Final Protection
- Use non-sanded or finely sanded grout depending on joint width; test compatibility on a sample area.
- Apply grout with a rubber float, pushing it diagonally into the joints.
- Wipe off excess grout promptly and buff after 15–20 minutes.
- Once grout is fully cured (typically 72 hours), apply a penetrating sealer designed for honed white marble to protect against stains and moisture.
Maintenance Tips – Keep It Bright
- Use only pH-neutral stone cleaners. Avoid acidic or abrasive products.
- Clean spills quickly—especially oils and dyes—to prevent surface darkening or absorption.
- Re-seal every 6–12 months, based on traffic and use.
- Use pads or rugs in high-traffic zones and under furniture to minimize abrasion.
Shipping & Packaging
Each 12″ x 24″ Dolomite Honed Marble Tile is individually cushioned for safe transit. Store tiles in a dry, interior location and inspect all pieces before installation.
Important Note
Dolomite is a natural stone and may exhibit slight variations in tone and veining. These are inherent to the material and not considered defects. Always dry-lay and plan before installation. Stonemarket USA is not liable for installation issues or improper handling.
