Coralina Beige 24×24 2CM Porcelain Paver – Natural
The Coralina Beige 24×24 2CM Porcelain Paver combines the timeless beauty of natural limestone with the exceptional durability and low maintenance of premium porcelain. Featuring soft beige tones and authentic stone-inspired movement, it creates an elegant outdoor environment for both residential and commercial spaces.
Designed with a 24″ x 24″ rectified format and a durable 20 mm (2CM) thickness, this porcelain paver is built to withstand demanding outdoor conditions. Its Natural finish provides an authentic stone appearance while delivering excellent slip resistance, making it ideal for patios, pool decks, walkways, and outdoor living areas.
Whether you’re designing a backyard retreat, poolside entertainment area, rooftop terrace, or commercial landscape project, Coralina Beige offers lasting performance with a refined natural look.
Features
- Premium 20 mm porcelain paver
- Natural limestone-inspired appearance
- Soft beige color with realistic stone variation
- Large format 24″ x 24″
- Rectified edges for clean installation
- Natural finish
- Slip resistant surface for outdoor use
- Scratch, stain, fade, and weather resistant
- Frost resistant
- Suitable for residential and commercial projects
- Easy to clean and maintain
- Built for long-lasting outdoor performance
Recommended Applications
- Patios
- Pool Decks
- Walkways
- Garden Paths
- Outdoor Kitchens
- Outdoor Living Areas
- Rooftop Terraces
- Commercial Landscapes
- Hospitality Projects
Installation Guide – Coralina Beige 24×24 2CM Porcelain Paver
Important Advisory
This guide covers the installation of Coralina Beige 24×24 2CM Porcelain Pavers only. Proper sub-base preparation, drainage, and bedding must be completed in accordance with local building codes, manufacturer recommendations, and recognized industry standards before installation.
Step 1: Layout & Planning
- Dry-lay the pavers before installation to evaluate color variation and determine the preferred layout.
- Plan the installation pattern to create balanced joints and a natural stone appearance.
- Use chalk lines or a laser level to establish straight reference lines for accurate alignment.
Step 2: Paver Installation
- Install the 24″ x 24″ porcelain pavers over a properly prepared setting bed, sand base, mortar system, or pedestal system, depending on the installation method.
- Maintain consistent joint spacing of approximately 1/8″ to 3/16″.
- Use a rubber mallet when necessary to properly seat each paver without damaging the surface.
- Regularly check level, spacing, and alignment throughout the installation process.
Step 3: Cutting
- Cut the porcelain pavers using a wet saw equipped with a high-quality diamond blade designed for porcelain.
- Support each paver properly during cutting to minimize edge chipping.
- Always measure carefully before cutting to ensure a precise fit and professional finish.
Step 4: Joint Filling
- Fill the joints with polymeric sand or another jointing material recommended for porcelain paver installations.
- Remove excess jointing material from the surface before final curing.
- Follow the jointing material manufacturer’s installation instructions for best results.
Step 5: Cleaning & Maintenance
- Clean the surface regularly using water and a pH-neutral cleaner.
- Avoid acidic, bleach-based, or abrasive cleaning products.
- Porcelain pavers do not require sealing under normal residential or commercial use.
- Inspect joints and surrounding areas periodically to maintain long-term performance.
Disclaimer
Natural color variation and stone-inspired patterns are intentional characteristics of the Coralina collection and enhance its authentic appearance. Inspect all materials before installation, as installed products are considered accepted. Professional installation is recommended to ensure optimal performance and long-lasting durability.
