Agathos Multicolor 24×24 2CM Porcelain Paver – Natural
The Agathos Multicolor 24×24 2CM Porcelain Paver brings layered color and contemporary style to outdoor spaces. Its natural finish presents a versatile multicolor palette that coordinates effortlessly with wood, metal, and greenery for cohesive patios and open‑air rooms.
Engineered at a robust 20 mm (2CM) thickness, this porcelain paver is designed for outdoor performance with low‑maintenance durability. Rectified edges support clean lines and balanced joint spacing for modern, orderly layouts. A PEI 4 wear rating offers dependable surface strength for everyday residential foot traffic when installed to industry standards.
Frost resistance helps the paver stand up to seasonal temperature swings, making it a smart choice for inviting patios, walkways, garden paths, and outdoor kitchens. Each 24×24 module streamlines planning and installation for a polished, long‑lasting finish.
Features
- 24×24 large-format 20 mm (2CM) porcelain paver
- Multicolor tone in a Natural finish
- Rectified edges for precise lines and consistent joints
- PEI 4 wear rating for durable residential performance
- Frost resistant for year‑round outdoor use
- Low maintenance and easy to clean
- Approx. 7.75 sq ft per box coverage (24×24)
- Designed for outdoor residential applications when installed per standards
Recommended Applications
- Patios
- Walkways
- Garden Paths
- Outdoor Kitchens
- Outdoor Living Areas
- Courtyards
- Rooftop Terraces
Installation Guide – Agathos Multicolor 24×24 2CM Porcelain Paver – Natural
Important Advisory
This guidance applies to the installation of Agathos Multicolor 24×24 2CM Porcelain Pavers. Always follow manufacturer instructions, local building codes, substrate and drainage requirements, and current industry standards (e.g., TCNA/ANSI) before starting any project.
Step 1: Layout & Planning
- Dry‑lay pavers to review shade, size calibration, and layout prior to installation.
- Plan patterns and cuts for balanced joints and to minimize narrow slivers at edges.
- Establish reference lines with chalk or a laser to maintain straight courses and proper slope for drainage.
Step 2: Paver Installation
- Install 24×24 porcelain pavers over a properly prepared and compacted sand setting bed, a bonded mortar bed, or an adjustable pedestal system approved for 2CM porcelain.
- Confirm adequate slope and drainage away from structures per local codes.
- Maintain consistent joint spacing (typically about 1/8"–3/16") using appropriate spacers.
- Seat each paver gently with a rubber mallet to ensure full support without chipping the rectified edges or surface.
- Check alignment, flatness, and joint consistency frequently, and incorporate movement joints per standards and site conditions.
Step 3: Cutting
- Cut using a wet saw with a premium diamond blade rated for porcelain.
- Support the paver fully during cutting to reduce edge chipping and improve accuracy.
- Measure carefully and mark clearly before every cut; wear appropriate PPE.
- Avoid dry cutting where possible and control dust per safety regulations.
Step 4: Joint Filling
- For sand‑set installations, fill joints with polymeric sand or another jointing material approved for porcelain pavers and outdoor use.
- For mortar‑set installations, use an exterior‑grade grout per manufacturer guidance; clean as you go to help prevent haze.
- On pedestal systems, follow the pedestal and spacer manufacturer’s recommendations for joint treatment and perimeter restraint.
- Remove all excess jointing material from the surface before curing and final cleaning.
Step 5: Cleaning & Maintenance
- Clean routinely with water and a pH‑neutral cleaner using non‑abrasive tools.
- Avoid acidic, bleach‑based, or abrasive products that may harm surrounding materials or finishes.
- Promptly remove construction residues and any grout haze following manufacturer recommendations.
- Porcelain pavers typically do not require sealing; inspect joints and borders periodically and maintain as needed.
Disclaimer
Shade and size variation can occur between production runs; verify caliber and dye lot before installation. Inspect all materials prior to install—installed materials are considered accepted. Professional installation is recommended to ensure code compliance, structural integrity, and long‑term performance.
