Agathos Grey 24×24 2CM Porcelain Paver – Natural
The Agathos Grey 24×24 2CM Porcelain Paver brings a versatile gray tone and clean, contemporary character to outdoor spaces. Its natural finish offers an understated look that complements modern and classic landscape palettes, while the large 24×24 format establishes smooth, balanced lines across patios and terraces.
Crafted from durable porcelain at a robust 2CM (3/4") thickness, this paver features rectified edges for precise alignment and a refined layout. Frost resistance and low‑maintenance performance support year‑round use in open‑air areas when installed to industry standards.
Engineered for outdoor projects, Agathos Grey is a smart choice for patios, walkways, courtyards, rooftop terraces, and other exterior living areas where reliable durability and easy upkeep matter.
Features
- 24×24 large-format 2CM (3/4") porcelain paver
- Grey color in a Natural finish
- Rectified edges for crisp lines and consistent joints
- PEI 4 wear rating for durable surface performance
- Frost resistant for year‑round outdoor use
- Low maintenance and easy to clean
- Approx. 7.75 sq ft per box coverage
- Suitable for exterior installations when set per standards
Recommended Applications
- Patios
- Walkways
- Garden Paths
- Outdoor Kitchens
- Outdoor Living Areas
- Rooftop Terraces
- Courtyards
- Entryways
Installation Guide – Agathos Grey 24×24 2CM Porcelain Paver – Natural
Important Advisory
This guidance applies to the installation of Agathos Grey 24×24 2CM Porcelain Pavers. Always follow manufacturer instructions, local building codes, substrate and drainage requirements, and current industry standards (e.g., TCNA/ANSI) before starting any project.
Step 1: Layout & Planning
- Dry‑lay pavers to review shade, size calibration, and layout before installation.
- Plan patterns and cuts to achieve balanced joints and avoid narrow slivers at edges.
- Establish reference lines with chalk or a laser to maintain straight courses and proper slope for drainage.
Step 2: Paver Installation
- Install 24×24 porcelain pavers over a properly prepared and compacted sand setting bed, a bonded mortar bed, or an adjustable pedestal system approved for 2CM porcelain.
- Confirm adequate slope and drainage away from structures per local codes.
- Maintain consistent joint spacing (typically about 1/8"–3/16") using appropriate spacers.
- Seat each paver gently with a rubber mallet to ensure full support without chipping the rectified edges or surface.
- Check alignment, flatness, and joint consistency frequently, and incorporate movement joints per standards and site conditions.
Step 3: Cutting
- Cut using a wet saw with a premium diamond blade rated for porcelain.
- Support the paver fully during cutting to minimize edge chipping and ensure accuracy.
- Measure carefully and mark clearly before every cut; use appropriate PPE.
- Avoid dry cutting where possible and control dust per safety regulations, especially with 2CM material.
Step 4: Joint Filling
- For sand‑set installations, fill joints with polymeric sand or another jointing material approved for porcelain pavers and outdoor use.
- For mortar‑set installations, use an exterior‑grade grout per manufacturer guidance; clean as you go to prevent haze.
- On pedestal systems, follow the pedestal and spacer manufacturer’s recommendations for joint treatment and perimeter restraint.
- Remove all excess jointing material from the surface before curing and perform a final clean per product instructions.
Step 5: Cleaning & Maintenance
- Clean routinely with water and a pH‑neutral cleaner using non‑abrasive tools.
- Avoid acidic, bleach‑based, or abrasive products that may harm surrounding materials or finishes.
- Promptly remove construction residues and grout haze following manufacturer recommendations.
- Porcelain pavers generally do not require sealing; inspect joints and borders periodically and maintain as needed.
Disclaimer
Shade and size variation can occur between production runs; verify caliber and dye lot before installation. Inspect all materials prior to install—installed materials are considered accepted. Professional installation is recommended to ensure code compliance, structural integrity, and long‑term performance.
