Carrara White Polished Marble Tile 12″x24″
Timeless Sophistication with Mediterranean Flair
The Carrara White Polished Marble Tile 12″x24″ is a refined and radiant addition to any interior design. With its polished surface and soft veining, this premium marble tile reflects light beautifully, adding spaciousness and elegance to floors, walls, and shower surrounds. Its 12″x24″ format offers a modern layout with fewer grout lines, enhancing visual continuity and ease of maintenance.
Perfect for residential or commercial spaces, the tile features a crisp white background layered with subtle gray veining—capturing the natural beauty of authentic Carrara marble. Whether used in minimalist bathrooms or luxurious foyers, it complements both classic and contemporary aesthetics.
Key Features:
- Material: Genuine Carrara White Marble
- Finish: Polished – smooth and reflective surface
- Size: 12″x24″ (30.5×61 cm)
- Thickness: 0.47″ (1.2 cm)
- Edge: Straight edge for a clean installation
- Color: Bright white base with soft gray veining
- Applications: Ideal for floors, walls, bathrooms, and kitchens
Why Choose Carrara White Polished Tile?
This tile merges Italian tradition with modern design sensibility. Its polished finish magnifies light, creating a luxurious feel even in compact spaces. Durable, easy to clean, and architecturally versatile, it is a staple for designers and builders aiming for understated grandeur.
Installation Guide – Step by Step
Step 1: Surface Preparation – Ensure Flatness and Stability
- Clean the substrate thoroughly—remove all dust, grease, and loose debris.
- Check for flatness using a 10-ft straightedge. Surface variation must not exceed 1/8″.
- Apply a self-leveling underlayment if necessary for large-format tile support.
- Use a waterproofing membrane for wet zones such as bathrooms or kitchens.
Step 2: Layout Planning – Emphasize Vein Flow
- Establish layout lines to ensure balanced placement and minimize awkward cuts.
- Dry-lay tiles to visualize Carrara veining and natural tonal differences.
- Blend tiles from multiple boxes for consistency across the installation.
- Use **1/16″ to 1/8″ grout joints** with straight-edge polished marble for clean results.
Step 3: Mortar Application – Use White Thin-Set
Recommended Mortars:
- Mapei Ultraflex LFT White
- Laticrete 254 Platinum White
- Ardex X77 White
Instructions:
- Spread thin-set using a 1/2″ square-notched trowel for full coverage.
- Back-butter each tile to enhance bond and prevent hollow spots.
- Only cover small sections at a time to prevent mortar from skinning over.
Step 4: Cutting & Fitting – Smooth and Accurate
- Use a wet saw with a continuous-rim diamond blade suitable for marble.
- Polish any visible cut edges using a stone file or fine-grit pad.
- Dry-fit cut pieces to confirm spacing and alignment before setting.
Step 5: Setting Tiles – Ensure Level Alignment
- Use a tile leveling system to prevent lippage between large-format tiles.
- Gently press tiles into mortar and use spacers to maintain uniform joints.
- Wipe off excess thin-set from the polished surface immediately using a damp sponge.
- Allow to cure for 24 hours before applying grout.
Step 6: Grouting & Sealing – Enhance & Protect
- Pre-seal polished Carrara tiles with a penetrating sealer to prevent grout staining.
- Use non-sanded grout to avoid scratching the polished surface.
- Apply grout diagonally with a rubber float and clean excess promptly.
- Buff any haze off the surface after 20–30 minutes with a soft cloth.
- Seal again after grout cures (typically 72 hours) for added protection.
Maintenance Tips – Preserve the Shine
- Clean regularly using pH-neutral, stone-safe products only.
- Wipe spills promptly—especially acidic substances like wine or lemon juice.
- Re-seal every 6–12 months depending on traffic and exposure.
- Use rugs or felt pads under furniture to prevent wear and scratches.
Shipping & Packaging
Each 12″ x 24″ Carrara Polished Marble Tile is cushioned with foam and edge protection. Inspect prior to installation to verify color matching and finish quality.
Important Note
Natural marble may exhibit variation in veining, tone, and fossil inclusions. Always dry-lay before installing. Stonemarket USA is not responsible for installation errors or natural variations inherent to the stone.
