Calacatta Marble Tile 12″x24″ Honed – Beveled Edge White Marble
Timeless Elegance with Distinctive Veining
Bring luxury and sophistication into your space with the Calacatta Marble Tile 12″x24″ Honed. Crafted from high-quality natural marble, this tile features a soft honed finish and subtle beveled edges, highlighting the stone’s iconic gray veining on a luminous white background. It’s a versatile option that complements both modern and traditional designs, offering a timeless statement for bathrooms, kitchens, and feature walls.
Key Features of Calacatta Honed Marble Tile
- Material: Premium Calacatta Marble
- Color: White base with bold, natural gray veining
- Finish: Honed – smooth and matte surface
- Edge Detail: Beveled edge for dimensional refinement
- Size: 12″x24″ (30.5×61 cm)
- Thickness: 0.4″ (1 cm)
- Recommended Applications: Interior walls and floors, especially in bathrooms, kitchens, and entryways
Why Choose Calacatta Marble?
This tile is prized for its dramatic veining and luxurious feel. Its honed finish offers a more contemporary matte aesthetic while maintaining the classic beauty of Calacatta marble. Additionally, the beveled edge adds definition, enhancing layout patterns and creating a sculpted visual effect. Whether you’re designing a spa-like bath or a refined entryway, this tile delivers sophistication and durability in equal measure.
Installation Guide – Step by Step
Step 1: Surface Preparation – Solid, Clean, and Level
- Ensure the substrate is clean, dry, and structurally sound.
- Verify flatness with a 10-ft straightedge—variation must not exceed 1/8″.
- Apply a self-leveling compound if needed to correct uneven subfloors.
- Install a waterproof membrane in areas prone to moisture (e.g., bathrooms, kitchens).
Step 2: Layout Planning – Showcase Calacatta’s Veining
- Establish layout reference lines for balanced alignment and fewer cuts.
- Dry-lay tiles to preview bold veining patterns and tone variation.
- Blend from multiple boxes for visual consistency across the installation area.
- Use grout joints of 1/16″ to 1/8″ to complement the beveled edges.
Step 3: Mortar Application – White Thin-Set Only
Recommended Mortars:
- Mapei Ultraflex LFT White
- Laticrete 4-XLT or 253 Gold White
- Ardex X5 or X77 White
Instructions:
- Apply thin-set with a 1/2″ square-notched trowel for full coverage.
- Back-butter each tile to ensure bond and avoid hollow spots.
- Install tiles before the mortar skins over for proper adhesion.
Step 4: Cutting & Fitting – Clean & Consistent
- Use a wet saw with a continuous-rim diamond blade to avoid chipping.
- Polish visible edges to match the honed surface where needed.
- Dry-fit cut pieces to verify alignment and spacing prior to final setting.
Step 5: Setting Tiles – Control Lippage
- Use a tile leveling system for a smooth finish across large-format tiles.
- Apply even pressure with a rubber mallet to seat tiles correctly.
- Maintain consistent joint spacing using spacers suited for beveled edges.
- Remove excess thin-set from joints and surfaces before it dries.
- Allow adhesive to cure for 24 hours before grouting.
Step 6: Grouting & Sealing – Protect the Beauty
- Pre-seal honed Calacatta marble with a penetrating sealer to avoid grout stains.
- Use non-sanded grout to preserve the surface and beveled edge integrity.
- Apply grout diagonally and clean joints promptly with a sponge.
- Buff any grout haze off the tile after 20–30 minutes with a soft cloth.
- Re-seal tiles and grout lines after full cure (typically 72 hours).
Maintenance Tips – Maintain the Elegance
- Clean regularly with pH-neutral, non-acidic cleaners suitable for marble.
- Avoid abrasive pads or acidic solutions that can damage the honed finish.
- Wipe spills immediately to prevent staining or etching.
- Re-seal as needed—typically every 6–12 months depending on usage.
Shipping & Packaging
Each 12″ x 24″ Calacatta Honed Marble Tile is cushioned and protected with reinforced edge guards. Please inspect tiles prior to installation to confirm color, veining, and finish uniformity.
Important Note
Calacatta marble is a natural material with inherent variation in tone, veining, and movement. Always dry-lay tiles before permanent installation. Stonemarket USA is not responsible for installation errors or natural stone variation.
