Pietra D’Assisi Beige 12×24 Porcelain Tile Natural Pressed
Warm and versatile, Pietra D’Assisi Beige in a 12×24 format delivers a clean, understated look with a natural matte surface. The pressed edge provides classic grout joints for a balanced, timeless installation that complements a wide range of interiors.
Engineered in durable porcelain and rated for heavy wear, this tile blends everyday practicality with design flexibility for kitchens, baths, living spaces, and commercial environments. Frost resistance also supports exterior wall applications in freeze–thaw climates.
Use it on its own for a seamless, modern canvas or integrate it with complementary materials to build layered detail across floors and walls.
Features
- Material: Porcelain for durability and easy care
- Color: Beige
- Finish: Natural (matte)
- Edge: Pressed
- Size: 12×24 rectangular tile
- PEI: 5 wear rating
- DCOF: 0.72 (wet)
- Frost resistant for freeze–thaw exterior wall use
- Coverage: 11.63 sq. ft. per box | 6 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Pietra D’Assisi Beige 12×24 Porcelain Tile Natural Pressed
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Confirm substrate suitability, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, structurally sound, and within flatness tolerances for the tile size.
- Plan the layout by dry-laying tiles to balance cuts and align patterns; avoid small slivers at perimeters.
- Blend material from multiple boxes to evenly distribute any shade or pattern variation.
- Use spacers and a joint width appropriate for pressed edges; include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain tile and the project conditions.
- Key mortar into the substrate and comb in one direction with a suitable notched trowel; back-butter 12×24 tiles as needed to improve bond.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve required coverage (typically 80–95% based on area and exposure).
- Use a leveling system if needed to help control lippage on larger formats.
- Allow mortar to cure per manufacturer guidance before grouting or allowing traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Support the tile fully and mark cuts carefully to reduce chipping.
- Ease sharp cut edges where they will be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; follow manufacturer instructions for mixing, application, and curing.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use appropriate sealant at changes of plane and movement joints; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner formulated for porcelain tile; avoid acids and harsh abrasives.
- Use entry mats and protective pads to minimize tracked-in grit and scratching.
- Follow grout and mortar manufacturers’ maintenance guidance; reseal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Always confirm actual materials, lot-to-lot variations, and suitability for the intended application before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
