Calacatta Marble Tile 6″x12″ Honed – Beveled Edge
Compact Elegance with Iconic Calacatta Character
Experience the refined beauty of Italian stonework with the Calacatta Marble Tile 6″x12″ Honed – Beveled Edge. This compact tile format features the signature bold veining and creamy white background of Calacatta marble, offering a timeless aesthetic that fits both traditional and modern designs. The honed finish softens the stone’s natural luminosity, creating a matte surface that emphasizes its intricate pattern.
Perfect for vertical or horizontal layouts, this tile’s smaller size offers flexibility in installation and artistic arrangements. Whether applied in a herringbone, stacked, or offset pattern, it delivers architectural distinction with ease. The beveled edges enhance each tile’s outline, adding subtle definition and depth to your surfaces.
Product Details
- Material: Genuine Calacatta Marble
- Finish: Honed – matte, smooth surface
- Edge: Beveled for clean visual framing
- Size: 6″ x 12″ (15.25 x 30.5 cm)
- Color: Classic white with bold, natural veining
- Application: Ideal for backsplashes, bathroom walls, fireplace surrounds, and accent trims
Why Choose This Tile?
This 6″x12″ Calacatta tile allows for both creative expression and practical installation. Its honed finish reduces glare and helps hide water spots, while the premium marble composition brings enduring value. Pair it with large-format Calacatta tiles or neutral tones for balanced, sophisticated interiors.
Installation Guide – Step by Step
Step 1: Surface Preparation – Ensure a Strong Base
- Clean the substrate of all dust, grease, and residues.
- Ensure flatness with minimal variation—maximum 1/8″ in 10 feet.
- Apply a waterproof membrane in wet environments like showers or backsplashes.
Step 2: Layout Planning – Emphasize Veining Flow
- Mark layout lines and determine tile orientation based on your pattern (e.g., herringbone or brick).
- Dry-lay tiles to preview veining and tone variation.
- Mix tiles from multiple boxes for a balanced visual.
- Use 1/16″ to 1/8″ grout joints to enhance beveled edges.
Step 3: Mortar Application – Use White Thin-Set
Recommended Mortars:
- Mapei Ultraflex 1 White
- Laticrete 253 Gold White
- Ardex X5 White
Instructions:
- Apply with a 1/4″ square-notched trowel.
- Back-butter each tile for full bond strength.
- Work in small sections to prevent premature setting.
Step 4: Cutting & Fitting – Preserve the Finish
- Use a wet saw with a continuous-rim diamond blade.
- Polish visible cut edges to match the honed finish.
- Dry-fit pieces before installing to ensure a clean fit.
Step 5: Setting Tiles – Clean and Consistent
- Install tiles with light pressure and a level for alignment.
- Use spacers to maintain consistent joints between beveled edges.
- Wipe off excess mortar from the surface immediately.
- Allow mortar to cure for 24 hours before grouting.
Step 6: Grouting & Sealing – Protect the Stone
- Pre-seal tiles with a penetrating marble-safe sealer before grouting.
- Use non-sanded grout to prevent surface scratching.
- Grout diagonally and clean joints thoroughly with a damp sponge.
- Buff any haze after 20–30 minutes with a soft cloth.
- Seal tiles again after grout curing for lasting protection.
Maintenance Tips – Keep It Natural
- Use pH-neutral stone cleaners for routine cleaning.
- Avoid acidic or abrasive products that may etch the marble.
- Reseal every 6–12 months depending on location and use.
Shipping & Packaging
Each 6″ x 12″ Calacatta Honed Tile is cushioned with foam edge guards. Inspect tiles upon delivery for veining consistency and finish quality before installation.
Important Note
Calacatta marble features natural variation in tone and veining. Always dry-lay tiles before installation to confirm layout. Stonemarket USA is not responsible for installation errors or natural variation.
