Avalon White 6×12 Leather Finish Marble Paver offers a refined combination of beauty, texture, and performance. Crafted from high-quality white marble, it features a leathered surface that enhances grip while preserving the stone’s natural charm.
Measuring 6″x12″, this paver is ideal for outdoor applications such as patios, walkways, garden paths, and pool decks. Its compact size allows for flexible patterns, including herringbone and stacked layouts. The soft white tone brightens up exterior spaces, while the leather finish provides a modern yet organic look.
- Stone Type: Natural Marble
- Color: Avalon White
- Finish: Leathered / Textured
- Dimensions: 6″x12″
- Usage: Outdoor flooring, pool decks, patios, and pathways
- Surface: Non-slip and easy to maintain
Enhance your landscape design with the elegance and practicality of this premium marble paver. It blends timeless aesthetics with everyday durability.
Installation Guide – Avalon White 6″x12″ Leather Finish Marble Paver
Material Overview
- Natural marble paver with a leather (brushed) finish for a slightly textured, slip-resistant surface.
- Designed for outdoor horizontal installation such as patios, walkways, and terraces.
- Not recommended for high-load driveways without reinforced installation.
Step 1: Base Preparation (Dry-Set Method)
- Excavate to a depth of 6″–8″, depending on soil and climate conditions.
- Lay 4″–6″ of compacted crushed stone or gravel base (minimum 95% compaction).
- Add 1″ of bedding sand or screenings and screed to create a level surface.
Step 2: Laying the Pavers
- Place pavers in your desired layout (e.g., running bond or herringbone) with consistent joint spacing (1/8″–1/4″).
- Tap each paver gently with a rubber mallet to set it firmly in the bedding layer.
- Use a level regularly to ensure an even finish.
Step 3: Cutting and Adjustments
- Use a wet saw with a diamond blade suitable for marble to make precise cuts.
- Wear protective gear and cut in a well-ventilated outdoor area.
Step 4: Joint Filling
- Sweep polymeric sand or fine joint sand into gaps between pavers.
- Compact the surface with a plate compactor equipped with a rubber pad.
- Mist lightly with water if using polymeric sand to activate the binding agents.
Sealing & Maintenance
- Apply a penetrating sealer formulated for marble and exterior use to enhance longevity and reduce staining.
- Re-seal every 1–2 years depending on foot traffic and weather exposure.
- Clean with a pH-neutral cleaner. Avoid acidic or abrasive substances that may etch the marble.
Disclaimer
Marble is a natural stone and may feature veining, tonal variation, and surface movement. These characteristics are part of its aesthetic. Proper sub-base compaction and drainage planning are critical for outdoor performance. Always perform a dry layout and sample area prior to full installation.
