Silver Tumbled 6″x12″ Travertine Paver – Cool Gray, Classic Form
Elevate hardscapes with the Silver Tumbled 6×12 Travertine Paver. Its cool gray and silver-beige tones add calm, modern character. The tumbled surface brings gentle texture and comfortable underfoot feel.
Because the 6″x12″ size is compact, layout options multiply. Create herringbone walkways, running-bond patios, or detailed borders with ease. Moreover, the softened edges deliver an organic, timeworn look that pairs with wood, metal, or lush planting.
Key Features
- Material: Premium natural travertine
- Color: Silver gray with subtle beige movement
- Finish: Tumbled texture for natural grip and patina
- Size: 6″x12″ (nominal)
- Edge: Softly rounded, weathered profile
- Patterns: Herringbone, running bond, stacked, and borders
- Use: Patios, paths, pool surrounds, courtyards, and entryways
Choose this silver travertine when you want clean lines and a relaxed, coastal feel. Additionally, simple sealing and seasonal care help preserve color and texture for years.
Installation Guide – Silver Tumbled 6″x12″ Travertine Paver
Important Note
This guide covers only the paver covering phase. Sub-base and bedding preparation must be completed by qualified professionals before installation.
Step 1: Dry Layout & Planning
- Dry-lay pavers to review natural color/vein variation and tumbled edge differences.
- Choose a pattern that suits the space—herringbone, basketweave, or running bond are ideal for 6″x12″.
- Snap chalk lines or use a laser to set straight reference lines for alignment.
Step 2: Paver Placement
- Set each 6″x12″ paver gently onto the prepared bedding layer following your layout lines.
- Maintain uniform joint spacing of 1/8″–1/4″.
- Tap lightly with a rubber mallet to fully seat each paver and achieve a level surface.
- Check for lippage across edges as you go; adjust bedding where needed.
Step 3: Cutting & Edge Finishing
- Use a wet saw with a diamond blade rated for travertine for clean, accurate cuts.
- Support small-format pavers during cutting to prevent chipping.
- Smooth any exposed cut edges with a rubbing stone to blend with the tumbled finish.
Step 4: Joint Filling
- Fill joints with polymeric sand or a travertine-compatible joint filler.
- Gently compact the surface and sweep away excess material.
- If using polymeric sand, lightly mist to activate per manufacturer instructions.
Step 5: Sealing & Maintenance
- After the installation is dry, apply a breathable, penetrating sealer formulated for exterior travertine.
- Re-seal every 1–2 years depending on exposure and traffic.
- Clean with pH-neutral stone cleaners only; avoid acidic or abrasive products.
Disclaimer
Travertine is a natural stone and may show tonal variation, surface pits, and veining—these are inherent characteristics, not defects. Always dry-lay and inspect materials before final installation. Professional installation is recommended for best performance and appearance.
