Happy Floors Waves Tide 12×24 Porcelain Tile Natural Rectified
Bring modern simplicity to your design with Waves in the Tide colorway. This 12×24 porcelain tile pairs a versatile natural (matte) surface with clean rectified edges for streamlined lines and a refined, contemporary feel across floors and walls.
Engineered in durable porcelain at 3/8" (9mm) thickness, Waves Tide balances everyday practicality with design flexibility. The format helps minimize grout lines, while frost resistance opens possibilities for exterior wall facades in freeze–thaw climates. Coordinate with other pieces from the Waves collection to build a cohesive look throughout your project.
A reliable choice for kitchens, baths, living areas, and commercial wall installations, the natural finish offers a soft, low-sheen appearance that complements a wide range of materials and finishes.
Features
- Porcelain body for durability and easy care
- Collection/Color: Waves – Tide
- Finish: Natural (matte) surface
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 format
- Thickness: 3/8" (9mm)
- PEI 4 wear rating
- DCOF: 0.42 (wet)
- Frost resistant for freeze–thaw exterior wall applications
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Happy Floors Waves Tide 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA). Ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, structurally sound, and flat within tolerances for large‑format tile.
- Plan the layout by dry‑fitting tiles and centering the design to avoid small perimeter cuts.
- Blend tiles from multiple boxes to distribute shade and pattern variation evenly.
- Use appropriate spacers and a joint width suitable for rectified tile; include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer‑modified thin‑set mortar approved for porcelain and large‑format tiles.
- Key mortar into the substrate, comb with an appropriate notched trowel, and back‑butter tiles as needed to improve coverage.
- Set tiles with a slight back‑and‑forth motion to collapse ridges and promote bond; achieve coverage per industry guidelines for the application and location (typically 80–95%).
- Use a leveling system when needed to help minimize lippage on large‑format installations.
- Allow mortar to cure per manufacturer instructions before grouting or opening to light traffic.
Step 3: Cutting
- Cut with a wet saw and a premium diamond blade rated for porcelain.
- Mark cuts carefully and support the tile fully to reduce chipping.
- Ease sharp cut edges where transitions are exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; mix and apply per manufacturer guidance.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use appropriate sealants at movement joints and changes of plane; do not grout those areas.
- Protect the installation from foot traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH‑neutral cleaner suitable for porcelain tile; avoid acids or harsh abrasives.
- Use entry mats and protective pads where appropriate to minimize tracked‑in grit and scratching.
- Follow grout and mortar manufacturers’ maintenance guidance; reseal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Always confirm actual materials, lot‑to‑lot variations, and suitability for specific applications before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
