Berwyn Charcoal 12×24 Porcelain Tile Natural Rectified
Clean and modern, the Berwyn Charcoal 12×24 porcelain tile delivers a rich charcoal tone with a versatile natural (matte) surface. Rectified edges support tight, consistent grout joints for a refined, streamlined look across walls and floors.
Made from durable porcelain, this tile balances design flexibility with everyday practicality. Frost resistance expands design possibilities to exterior facades in freeze–thaw climates, while the 12×24 format helps minimize grout lines for a smooth, contemporary layout.
Use it on its own for crisp minimalism or pair it with coordinating finishes to build layered architectural detail. The natural finish offers a soft, low-sheen look that complements both warm and cool palettes.
Features
- Porcelain body for durability and easy care
- Color: Charcoal
- Finish: Natural (matte) surface
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 rectangular tile
- PEI 4 wear rating
- DCOF: 0.42 (wet)
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 13.56 sq. ft. per box | 7 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Berwyn Charcoal 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Verify substrate suitability, movement accommodation, and required waterproofing/drainage before installation.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, structurally sound, and flat within tolerances suitable for 12×24 tile.
- Dry-lay to plan layout, balance cuts, and align grout joints with key sightlines.
- Blend tiles from multiple boxes to evenly distribute any shade/pattern variation.
- Use appropriate spacers and a joint width suitable for rectified tile; include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain tile.
- Key mortar into the substrate, comb with an appropriate notched trowel, and back-butter 12×24 tiles as needed to improve coverage.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve the bond; target coverage per industry guidelines for the application.
- Use a tile leveling system when needed to help minimize lippage with larger formats.
- Observe mortar cure times before grouting or allowing light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Mark cuts carefully and support the tile fully to minimize chipping.
- Ease sharp cut edges where they may be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; follow manufacturer instructions for mixing and cure.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly.
- Use sealant at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout cures.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner approved for porcelain tile; avoid acids and harsh abrasives.
- Use entry mats and felt pads where appropriate to reduce tracked-in grit and surface wear.
- Follow grout manufacturer maintenance guidance; reseal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot variations, and suitability for the intended application before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
