Timeless Grey 12×24 Porcelain Tile Natural Rectified
Clean and contemporary, Timeless Grey brings a refined neutral look with a versatile natural (matte) surface. The 12×24 format minimizes grout lines for a smooth, modern layout, while precise rectified edges support tight, consistent joints across floors and walls.
Engineered in durable porcelain, this tile balances design flexibility with everyday practicality. A PEI 4 wear rating and a DCOF of 0.42 support reliable traction for interior floors, and frost resistance opens design possibilities for exterior facades in freeze–thaw climates.
Use Timeless Grey on its own for understated minimalism or mix with complementary materials to build layered, architectural detail throughout kitchens, baths, living areas, and feature walls.
Features
- Porcelain body for durability and easy care
- Color: Grey
- Finish: Natural (matte) surface
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 tile
- PEI 4 wear rating for robust residential use
- DCOF: 0.42 (wet)
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 13.56 sq. ft. per box | 7 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Timeless Grey 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (e.g., ANSI A108/A118 and TCNA guidelines). Ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, structurally sound, and flat within industry tolerances for large-format tile such as 12×24.
- Dry-lay to plan the layout, balance cuts, and align grout joints; avoid narrow perimeter pieces.
- Blend tiles from multiple boxes to distribute shade and pattern variation evenly.
- Use appropriate spacers; include movement joints per TCNA EJ171 and project conditions.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain and for the tile size.
- Key mortar into the substrate, then comb with an appropriate notched trowel; back-butter tiles as needed to improve bond.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve required coverage per industry guidelines and application.
- Use a leveling system when appropriate to help minimize lippage on larger formats.
- Allow the setting material to cure as directed before grouting or permitting traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Measure and mark carefully; support the tile fully during cuts to minimize chipping.
- Ease sharp cut edges where they may be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; follow manufacturer instructions for mixing, application, and cure.
- Pack joints fully with a rubber float; clean diagonally and remove haze promptly with clean water.
- Use appropriate sealant at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic and moisture until grout has cured per manufacturer guidance.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner suitable for porcelain; avoid acids or harsh abrasives.
- Use entry mats and felt pads where appropriate to reduce grit and scratching.
- Follow grout and setting-material manufacturers’ maintenance recommendations; reseal cementitious grout if specified.
Disclaimer
Installation should be performed by qualified professionals. Verify actual materials, lot variations, and suitability for specific applications before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
