Statik Electrik Natural Rectified Porcelain Tile 24×48
Create a clean, contemporary surface with Statik Electrik Natural Rectified Porcelain Tile 24×48. Its Electrik color and natural finish provide a versatile foundation for coordinated interior designs, while the broad format creates a refined visual field with fewer grout lines.
Made from porcelain with a 10.5mm profile, rectified edges, and a PEI 3 rating, this tile is designed for suitable residential interior floor applications and other properly specified tile installations. Its frost-free designation may support appropriately planned freeze-resistant applications when the complete installation system and project conditions meet applicable requirements.
Statik Electrik is sold by the square foot. Each 24×48 tile provides 7.75 square feet of coverage, and each box contains 15.50 square feet across two pieces.
Features
- Electrik color with a natural finish for a contemporary, adaptable design.
- Porcelain construction for suitable residential and architectural tile applications.
- 24×48-inch format creates a broad visual field with fewer grout joints.
- Rectified edges support carefully aligned grout joints and a refined installation.
- 10.5mm thickness provides a substantial tile profile.
- PEI 3 rating supports suitable residential interior floor applications.
- Frost-free designation for appropriately specified freeze-resistant installations.
- Sold by the square foot; each box covers 15.50 square feet and contains two tiles.
Recommended Applications
- Residential interior floors
- Interior walls and architectural surfaces where the tile system is properly specified
- Coordinated interior feature walls
- Appropriately specified freeze-resistant applications where project conditions and the complete installation system permit it.
- Applications should be evaluated carefully where slip resistance is a concern, since the supplied DCOF rating is less than 0.42.
- ],
- short_description":"Statik Electrik Natural Rectified Porcelain Tile 24×48 brings a clean, contemporary presence to coordinated interior surfaces. Its natural finish, porcelain construction, substantial 10.5mm profile, and rectified edges support a refined installation with a broad visual field and carefully aligned joints. With a PEI 3 rating, this 24×48 porcelain tile is well suited to appropriate residential interior floor applications and can coordinate with interior walls and architectural features when specified for the project.","additional_info_text":"Estimated coverage: 7.75 sq. ft. per piece | 15.50 sq. ft. per box | 2 pieces per box.","installation_guide":{"important_advisory":"Review the current Happy Floors recommendations and confirm that the tile, setting materials, substrate, and planned application are compatible before beginning work. Installation should follow applicable local building codes, recognized tile-industry standards, and project-specific requirements.","layout_planning":["Verify the tile size, shade, caliber, finish, edge, and quantity before installation. Review pieces from multiple boxes to understand normal product variation and establish the preferred layout.","Dry-lay representative tiles when practical. Plan the layout to balance cuts, maintain visual alignment, and coordinate the Electrik color throughout the installation.","Mark reference lines so the installation remains square and aligned. Plan movement accommodation according to the substrate, room size, climate, and applicable industry guidance.","Because the tile has rectified edges, use a consistent joint width appropriate for the installation and product tolerances rather than placing tiles edge to edge."],"product_installation":["Install over a clean, sound, dry, and properly prepared substrate suitable for porcelain tile. Correct cracks, excessive variation, moisture concerns, or structural deficiencies before setting tile.","Select a mortar or setting material rated for porcelain tile and appropriate for the specific substrate and application. Follow the setting-material manufacturer’s mixing, open-time, and application instructions.","Apply mortar evenly and achieve the coverage required by applicable installation standards and project conditions. For this 24×48 tile, proper mortar contact and support across the back of each tile are especially important. Periodically lift a tile to verify contact, and do not place tile over mortar that has skinned over.","Set each tile according to the planned layout, pressing and adjusting it for proper contact, consistent joints, and a reasonably flush surface. Remove excess mortar from the joints before it hardens.","Allow the installation to cure according to the setting-material manufacturer’s instructions before grouting or subjecting the surface to traffic."],"cutting":["Measure and mark cuts carefully, allowing for the planned joint and movement spaces. Use a clean, appropriately rated wet saw or other professional cutting equipment suitable for porcelain tile.","Support the 24×48 tile adequately during handling and cutting to reduce the risk of damage. Use suitable eye, hearing, and respiratory protection.","Inspect cut edges and position cut pieces where they are least visible when the layout permits. Dry-fit cut pieces before setting them, and avoid using damaged or visibly defective pieces in prominent areas."],"joint_filling":["Confirm that mortar has cured and that joints are clean, dry, and free of setting material before grouting.","Choose a grout compatible with porcelain tile, the planned joint width, and the use conditions. Follow the grout manufacturer’s instructions for mixing, application, cleaning, and curing.","Apply grout carefully and remove excess from the tile surface before it hardens. Use clean water and suitable tools to minimize haze, then protect the installation until the grout has cured as directed.","Use an appropriate flexible sealant rather than rigid grout where movement joints or changes of plane are required, following the project design and recognized industry standards."],"cleaning_maintenance":["Remove installation residue using products approved for porcelain tile and follow the cleaner manufacturer’s directions. Test any cleaning product in an inconspicuous area first.","For routine care, use a soft mop or cloth with a pH-neutral cleaner suitable for porcelain. Avoid abrasive tools and harsh products that could damage the natural finish.","Clean spills and tracked dirt promptly, especially in high-use areas. Do not use maintenance procedures or sealers unless they are specifically recommended for this porcelain surface and application."],"disclaimer":"Stone Market USA provides general installation information for planning purposes. Site conditions, substrate construction, climate, tile format, and use can affect installation requirements. A qualified tile professional should verify project conditions and follow the tile, mortar, grout, sealant, and cleaner manufacturers’ instructions, as well as applicable codes and recognized industry standards."},"seo":{"focus_keyphrase":"Statik Electrik 24×48 porcelain tile","keyphrase_synonyms":"24×48 Electrik natural porcelain tile","seo_title":"Statik Electrik 24×48 Natural Porcelain Tile","slug":"statik-electrik-natural-rectified-porcelain-tile-24×48","meta_description":"Shop Statik Electrik Natural Rectified Porcelain Tile 24×48. This 10.5mm porcelain tile features a PEI 3 rating and broad contemporary format."},"image_alt_texts":{"main_image_alt":"Statik Electrik natural rectified porcelain tile 24×48","gallery_image_alt":"Statik Electrik 24×48 porcelain tile with a natural finish"}}.runner ösd?
