Happy Floors Waves Cloud 12×24 Porcelain Tile Natural Rectified
Clean and contemporary, the Waves Cloud 12×24 porcelain tile delivers a refined look with a versatile natural (matte) surface. The 12×24 format helps reduce grout lines for a smooth, modern layout on walls or floors, while precise rectified edges support tight, consistent joints.
Engineered in durable porcelain, this tile balances design flexibility with everyday practicality. A PEI 4 wear rating supports robust residential use and light commercial floors, and frost resistance opens design options for exterior facades in freeze–thaw climates.
Use Waves Cloud on its own for crisp minimalism or mix it with complementary materials to create layered, architectural detail. The natural finish offers a soft, low-sheen appearance that works across a range of interiors.
Features
- Material: Porcelain
- Collection/Color: Waves – Cloud
- Finish: Natural (matte)
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24
- Thickness: 3/8 in. (9mm)
- PEI Rating: 4
- DCOF: 0.42 (wet)
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 13.56 sq. ft. per box | 7 pieces per box | approx. 1.94 sq. ft. per piece
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Happy Floors Waves Cloud 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, structurally sound, and flat within industry tolerances for the tile size.
- Plan the layout by dry-laying tiles and centering the design to avoid small perimeter cuts.
- Blend tiles from multiple boxes to distribute any shade or pattern variation evenly.
- Use appropriate spacers and a joint width suitable for rectified tile; include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain tile.
- Key mortar into the substrate, comb with an appropriate notched trowel, and back-butter tiles as needed to improve coverage.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve proper bond; target the coverage required by application and location (typically 80–95%).
- Use a leveling system when helpful to minimize lippage with larger formats.
- Allow mortar to cure per manufacturer instructions before grouting or opening to light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Mark cuts carefully and support the tile fully to reduce chipping.
- Ease sharp cut edges as needed where they will be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; follow manufacturer directions for mixing, application, and cure times.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use appropriate sealants at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner suitable for porcelain tile; avoid acids and harsh abrasives.
- Use entry mats and felt pads where appropriate to minimize tracked-in grit and scratching.
- Follow grout and mortar manufacturers’ maintenance guidance; reseal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot-to-lot variations, and suitability for specific applications before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
