Iceberg Marble Tile 3″x12″ Honed – Straight Edge
Timeless Lines in Cool, Natural Stone
The Iceberg Marble Honed Tile offers a sleek and modern design, perfect for walls and backsplashes. Its elongated shape suits classic patterns such as stacked, herringbone, or vertical layouts, giving your space structure and flow.
Crafted from premium Iceberg marble, this tile features soft white tones and icy veining. The honed finish adds a refined matte texture, reducing glare while highlighting the natural beauty of the stone. Moreover, the straight edge ensures clean lines and minimal grout visibility.
Thanks to its durability, this tile performs well in humid areas like bathrooms and kitchens. Whether you’re designing a contemporary feature wall or a subtle, spa-like shower surround, this tile creates a calm and elevated look without overwhelming the space.
Product Features – Iceberg Marble Tile 3×12 Honed
- Material: Natural Iceberg Marble
- Finish: Honed – soft, low-sheen surface
- Size: 3″x12″ (7.5×30.5 cm)
- Edge Detail: Straight edge for seamless transitions
- Applications: Ideal for indoor walls and backsplashes
Installation Guide – Step by Step
Step 1: Surface Preparation – Clean and Flat
- Ensure the surface is clean, dry, and structurally sound.
- Check substrate flatness using a long level; correct dips and high spots with a leveling compound.
- Apply a waterproofing membrane in wet areas such as showers or backsplashes.
Step 2: Layout Planning – Align with Intent
- Choose your layout: stacked, herringbone, or vertical for the best visual impact.
- Dry-lay tiles to preview veining direction and achieve a balanced look using Iceberg marble’s natural variation.
- Use **1/16″–1/8″ grout joints** depending on design preference and edge alignment.
- Blend tiles from multiple boxes to ensure uniform color distribution.
Step 3: Mortar Application – Use White Thin-Set
Recommended Adhesives:
- Mapei Ultraflex LFT White
- Laticrete 254 Platinum White
- Ardex X77 White
Instructions:
- Apply mortar using a 1/4″ square-notched trowel for wall applications.
- Back-butter each tile for proper adhesion, especially important for narrow tiles.
- Work in small areas to prevent mortar skin-over.
Step 4: Cutting & Fitting – Precision Cuts
- Use a wet saw with a fine diamond blade rated for marble to achieve smooth, chip-free cuts.
- For herringbone patterns, make sure angles are cut precisely for tight joints.
- Test-fit cut pieces before securing them in place.
Step 5: Setting Tiles – Maintain Pattern and Alignment
- Start from the center or a visible focal point and work outward.
- Use spacers to maintain even grout lines and a consistent pattern.
- Tap tiles into place with a rubber mallet to ensure level installation and prevent lippage.
- Clean excess mortar promptly to avoid staining the honed surface.
Step 6: Grouting & Sealing – Protect and Finish
- Pre-seal with a penetrating sealer to protect against grout staining on honed marble.
- Use non-sanded grout for narrow joints to avoid scratching the marble surface.
- Apply grout with a rubber float at a diagonal angle, and wipe clean with a damp sponge immediately.
- Allow grout to cure for 72 hours, then apply a second coat of sealer for added protection.
Maintenance Tips – Keep It Timeless
- Use pH-neutral, non-abrasive cleaners designed for natural stone.
- Wipe spills quickly to prevent potential staining or etching.
- Reseal the surface every 6–12 months, especially in wet or high-use areas.
- Avoid using acidic or bleach-based products that could damage the honed surface.
Shipping & Packaging
Each 3″ x 12″ Iceberg Honed Marble Tile is carefully packaged with edge protection and foam inserts. Store indoors and inspect tiles prior to installation to ensure consistent veining and finish.
Important Note
Iceberg marble is a natural product and may vary slightly in tone and veining. Always dry-lay tiles before installation to achieve your desired layout. Stonemarket USA is not responsible for installation errors or natural stone variation.
