Newton Graphite 12×24 Porcelain Tile Natural Rectified
Refined and versatile, the Newton Graphite 12×24 porcelain tile brings a modern charcoal tone with a soft natural (matte) surface. Its precise rectified edges support clean, consistent joints for a streamlined look across floors and walls.
Crafted in durable porcelain at 9.5mm thickness, this tile balances style with everyday practicality. A PEI 4 wear rating suits busy residential areas and select light commercial floors, while frost resistance opens design options for exterior wall facades in freeze–thaw climates. Use it alone for a sophisticated monochrome statement or coordinate with complementary materials for layered architectural detail.
The 12×24 format helps minimize visual breaks so patterns read smoothly in living spaces, kitchens, baths, and feature walls. Low-maintenance porcelain makes upkeep straightforward in both residential and commercial wall settings.
Features
- Porcelain body for durability and easy care
- Color: Graphite (charcoal/gray tone)
- Finish: Natural (matte) surface
- Edge: Rectified for precise, narrow joints
- Size: 12×24 nominal | Thickness: 3/8 in (9.5mm)
- PEI 4 wear rating for robust residential and light commercial floors
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: approx. 1.94 sq. ft. per piece | 11.62 sq. ft. per box | 6 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Newton Graphite 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Confirm substrate suitability, flatness, movement accommodation, and required waterproofing/drainage for wet or exterior applications.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, structurally sound, and flat within industry tolerances for tile of this size.
- Plan layout by dry-fitting tiles, centering the pattern, and avoiding small perimeter cuts.
- Blend material from multiple boxes to evenly distribute shade/pattern variation.
- Select an appropriate joint width for rectified tile and include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain and for tiles of this size and weight.
- Key mortar into the substrate and comb with an appropriate notched trowel; back-butter tiles as needed to increase coverage.
- Set tiles with a slight slide to collapse ridges and achieve proper bond; target coverage consistent with ANSI and project conditions (higher coverage in wet/exterior areas).
- Use a leveling system if needed to help control lippage on larger units.
- Allow mortar to cure per manufacturer instructions before grouting or traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Support the tile fully, mark cuts carefully, and ease sharp cut edges at exposed transitions.
- Drill with diamond bits at low feed rates and with adequate cooling where needed.
Step 4: Joint Filling
- Choose grout suitable for porcelain and the selected joint width; follow manufacturer mixing and cure guidance.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use appropriate sealant at movement joints and all changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner formulated for porcelain tile; avoid harsh acids or abrasives.
- Use entry mats and felt pads to reduce grit and scratching.
- Follow grout manufacturer maintenance, including resealing cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Verify actual materials, lot variations, and suitability for specific applications prior to installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
