Stratus Oro 12×24 Porcelain Tile Polished Rectified
Bring a sleek, luminous look to your space with Stratus Oro in a versatile 12×24 format. The polished surface reflects light for a refined finish, while rectified edges support tight, consistent grout joints and crisp alignment across walls and floors.
Crafted in durable porcelain at a 9mm (3/8 in.) thickness and rated PEI 4, this tile balances style and everyday performance for busy residential areas and select light commercial settings. Frost resistance further expands design options to exterior facades in freeze–thaw climates.
Use Stratus Oro on its own for a clean, contemporary statement or integrate it with complementary materials to create layered, modern interiors.
Features
- Porcelain body for durability and easy care
- Color: Oro
- Finish: Polished
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 rectangular tile
- Thickness: 3/8 in. (9mm)
- PEI 4 wear rating for robust residential use and light commercial floors
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 11.62 sq. ft. per box | 6 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Stratus Oro 12×24 Porcelain Tile Polished Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Confirm substrate suitability, flatness, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, structurally sound, and flat within tolerance for 12×24 tile.
- Plan the layout, dry-lay as needed, and center the design to minimize small perimeter cuts.
- Blend tiles from multiple boxes to distribute any shade or pattern variation.
- Select a joint width appropriate for rectified tile; include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain and for the tile’s size/format.
- Key mortar into the substrate, then comb with an appropriate notched trowel; back-butter tiles to improve contact.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve required coverage for the area of use.
- Use a leveling system if needed to help minimize lippage with larger-format installations.
- Protect the installation and allow mortar to cure per manufacturer guidance before grouting or traffic.
Step 3: Cutting
- Use a wet saw with a premium diamond blade rated for porcelain.
- Mark cuts carefully, support the tile fully, and cut slowly to reduce chipping.
- Ease sharp cut edges where they may be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; follow the grout manufacturer’s instructions.
- Pack joints fully with a rubber float and clean diagonally; remove haze promptly with clean water.
- Use appropriate sealant at movement joints and changes of plane; do not grout these areas.
- Test grout on a spare tile if there is any concern about abrasion on polished surfaces.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner suitable for porcelain; avoid acids and harsh abrasives.
- Use entry mats and protective pads to minimize tracked-in grit and scratching.
- Follow grout and setting material manufacturers’ care recommendations; reseal cementitious grout if advised.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot variations, and suitability for specific applications before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
