Anthic Onyx 16″x24″ Tumbled Travertine Paver – Bold Variation, Large-Format Elegance
The Anthic Onyx 16″x24″ Tumbled Travertine Paver delivers striking visual depth through its dramatic blend of gold, silver, cream, and charcoal tones. Known for its high variation and expressive natural veining, this stone creates a distinctive surface that elevates both residential and commercial outdoor spaces.
The generous 16″x24″ format provides a clean, modern appearance with fewer visible joints, resulting in a more seamless installation. Its tumbled finish softens edges while enhancing slip resistance, making it a reliable choice for patios, pool surrounds, walkways, and courtyards.
Crafted from premium natural travertine, Anthic Onyx pavers are designed to withstand outdoor conditions while maintaining their bold aesthetic. Each piece offers unique character, ensuring every installation feels authentic, refined, and long-lasting.
- Material: Premium natural Anthic Onyx travertine
- Color: High-variation blend of gold, silver, cream, and charcoal tones
- Finish: Tumbled for a naturally aged look and slip resistance
- Size: 16″ x 24″ (nominal)
- Edge: Softly tumbled, weathered profile
- Applications: Patios, pool decks, walkways, courtyards, and outdoor living areas
Installation Guide – Anthic Onyx 16″x24″ Tumbled Travertine Paver
Important Note
This guide covers the paver placement phase only. Sub-base preparation, drainage, and bedding layers must be completed by qualified professionals before installation.
Step 1: Dry Layout & Planning
- Dry-lay pavers to evaluate natural color variation and veining.
- Use running bond or staggered layouts to minimize lippage with large-format pieces.
- Establish straight reference lines using chalk lines or a laser level.
Step 2: Paver Placement
- Place each 16″x24″ paver onto a properly leveled bedding surface.
- Maintain consistent joint spacing of 3/16″–1/4″.
- Tap gently with a rubber mallet to ensure full bedding contact.
- Check edges frequently and adjust bedding to prevent lippage.
Step 3: Cutting & Edge Finishing
- Use a wet saw with a diamond blade approved for travertine.
- Support large-format pavers during cutting to prevent cracking.
- Soften cut edges with a rubbing stone to match the tumbled finish.
Step 4: Joint Filling
- Fill joints with polymeric sand or a travertine-compatible joint filler.
- Compact gently and remove excess material.
- Lightly mist if polymeric sand is used, following manufacturer instructions.
Step 5: Sealing & Maintenance
- Apply a breathable, penetrating sealer once installation is dry.
- Re-seal every 12–24 months depending on exposure and traffic.
- Clean only with pH-neutral stone cleaners.
Disclaimer
Anthic Onyx travertine is a natural stone and may exhibit tonal variation, veining, and surface pits. These characteristics are inherent and not considered defects. Professional installation is recommended.
