Tierra Cinza 12×24 Porcelain Tile Natural Pressed
Refined and versatile, the Tierra Cinza 12×24 porcelain tile delivers a cool grey tone with a soft natural (matte) surface. The elongated 12×24 format creates a clean, modern look across walls or floors, while pressed edges support a classic grout joint aesthetic.
Engineered in durable porcelain, this tile balances style with everyday practicality—ideal for kitchens, baths, living areas, and commercial wall applications. Frost resistance expands design options to exterior facades in freeze–thaw climates.
Use it on its own for streamlined minimalism or coordinate with complementary materials to build layered, architectural detail. The understated matte finish pairs effortlessly with a wide range of fixtures and finishes.
Features
- Porcelain body for durability and easy maintenance
- Color: Cinza (grey)
- Finish: Natural (matte) surface
- Edge: Pressed for classic grout joints
- Size: 12×24 format
- PEI 4 wear rating for robust residential and light commercial use
- DCOF: 0.42 (wet)
- Frost resistant for freeze–thaw exterior wall applications
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Tierra Cinza 12×24 Porcelain Tile Natural Pressed
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Verify substrate suitability, flatness, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, structurally sound, and flat within industry tolerances for tile of this size.
- Plan the layout by dry-laying tiles and centering the design to reduce small perimeter cuts and align grout joints with focal points.
- Blend tiles from multiple boxes to evenly distribute any shade variation.
- For pressed-edge tiles, select a grout joint width appropriate to the edge profile and pattern. Include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain tile.
- Key mortar into the substrate, then comb with a suitable notched trowel. Back-butter tiles as needed to improve coverage, especially on walls or higher-traffic floors.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve proper bond; target coverage consistent with application and location (e.g., higher coverage for wet areas and exteriors).
- Use a tile alignment/leveling system if needed to help minimize lippage on tiles of this size.
- Allow mortar to cure per manufacturer instructions before grouting or opening to light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade designed for porcelain.
- Mark cuts carefully and support the tile fully during cutting to reduce chipping.
- Ease exposed cut edges as needed for a comfortable transition.
Step 4: Joint Filling
- Choose a grout suitable for porcelain and the selected joint width; follow manufacturer mixing and curing instructions.
- Pack joints fully with a rubber float, clean diagonally, and remove residue promptly with clean water.
- Use appropriate sealants at movement joints and all changes of plane; do not grout these areas.
- Protect the installation from foot traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner suitable for porcelain tile; avoid acids and harsh abrasives.
- Use entry mats and felt pads where appropriate to reduce tracked-in grit and potential scratching.
- Follow grout manufacturer maintenance guidance; reseal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot-to-lot variations, and suitability for the intended application before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
