Tierra Brown Castanho 12×24 Porcelain Tile Natural Pressed
Earthy and versatile, the Tierra Brown Castanho 12×24 porcelain tile brings a warm brown tone with a natural matte surface. The 12×24 format creates a modern look with fewer grout lines, while pressed edges offer a classic tile profile that works across a range of layouts.
Engineered in durable porcelain and frost resistant, it’s a practical option for kitchens, baths, living areas, and exterior facades in colder climates. With a PEI 3 wear rating and a DCOF of 0.42, it balances everyday performance with low-maintenance care on residential floors and walls.
Use it on its own for a clean, contemporary canvas or coordinate with complementary trims to complete edges and transitions throughout the space.
Features
- Porcelain body for durability and easy care
- Color: Brown (Castanho)
- Finish: Natural (matte) surface
- Edge: Pressed
- Size: 12×24 format
- Thickness: 8mm (5/16")
- PEI 3 wear rating for residential floor use
- DCOF: 0.42 (wet)
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 13.56 sq. ft. per box | 7 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Commercial interior walls
- Exterior walls/facades (freeze–thaw)
Installation Guide – Tierra Brown Castanho 12×24 Porcelain Tile Natural Pressed
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, structurally sound, and flat within industry tolerances for 12×24 tile.
- Plan the layout by dry-laying tiles to balance cuts and align with focal lines; avoid small perimeter slivers.
- Blend tiles from multiple boxes to evenly distribute any shade variation.
- Use spacers and a joint width appropriate for pressed-edge tile; include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain tile.
- Key mortar into the substrate, comb with an appropriate notched trowel, and back-butter tiles as needed to improve bond.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve required coverage (typically 80–95% depending on area and exposure).
- Use a leveling system where helpful to reduce lippage, especially with larger formats.
- Allow mortar to cure per manufacturer instructions before grouting or subjecting to light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade suitable for porcelain.
- Mark cuts carefully, support the tile fully, and feed steadily to minimize chipping.
- Ease sharp cut edges where they will be exposed.
Step 4: Joint Filling
- Select a grout appropriate for porcelain and the chosen joint width; follow manufacturer instructions for mixing, application, and cure.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use sealant at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has fully cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner suitable for porcelain tile; avoid acids and harsh abrasives.
- Use entry mats and felt pads where appropriate to minimize tracked-in grit and scratching.
- Follow grout and setting material manufacturers’ maintenance guidance; reseal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Always confirm actual materials, lot-to-lot variations, and suitability for specific applications before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
