Nextone Dark Line 12×24 Porcelain Tile Natural Rectified
Refined and modern, the Nextone Dark Line 12×24 porcelain tile brings a deep, contemporary tone with a natural matte surface. Precise rectified edges support tight, consistent joints for a clean layout on walls or floors.
Crafted in durable porcelain, this tile balances style with everyday practicality. The Line variant introduces a linear design statement that coordinates seamlessly across spaces, while frost resistance opens design possibilities for exterior facades in freeze–thaw climates.
The 12×24 format streamlines grout lines for a smooth visual field. Each box covers 15.50 sq ft (8 pieces), helping simplify planning and estimating for your project.
Features
- Porcelain body for durability and low maintenance
- Collection/Color: Nextone – Dark
- Design variant: Line
- Finish: Natural (matte)
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 format
- Thickness: 10mm (approx. 3/8")
- PEI 5 wear rating
- Frost resistant; suitable for exterior wall use in freeze–thaw climates
- Coverage: 15.50 sq ft per box | 8 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Nextone Dark Line 12×24 Porcelain Tile Natural Rectified
Important Advisory
Follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, structurally sound, and flat within tolerances for large-format tile.
- Dry-lay to plan layout and balance cuts; avoid slivers at perimeters and focal areas.
- Blend tiles from multiple boxes to evenly distribute any shade or pattern variation.
- Select a joint width suitable for rectified tile and include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain and for the tile size/format.
- Key mortar into the substrate, then comb with an appropriate notched trowel; back-butter tiles as needed to improve coverage.
- Set tiles with a slight sliding motion to collapse ridges and achieve the bond coverage required by application (typically 80–95%).
- Use a leveling system if needed to help manage lippage with 12×24 formats.
- Allow mortar to cure per manufacturer instructions before grouting or light traffic.
Step 3: Cutting
- Cut using a wet saw with a high-quality porcelain-rated diamond blade.
- Support the tile fully and mark cuts carefully to minimize chipping.
- Ease or dress sharp cut edges at exposed transitions as needed.
Step 4: Joint Filling
- Choose a grout suitable for porcelain and the selected joint width; follow manufacturer mixing and cure instructions.
- Pack joints completely with a rubber float, clean diagonally across joints, and remove haze promptly with clean water.
- Use appropriate sealant at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner approved for porcelain tile; avoid harsh acids and abrasives.
- Use entry mats and protective pads on furniture to limit grit and scratching.
- Follow grout and mortar manufacturers’ care recommendations; reseal cementitious grout if specified.
Disclaimer
Installation should be performed by qualified professionals. Always confirm actual materials, lot-to-lot variations, and suitability for the intended application before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
