Neostile 2.0 Cementi 12×24 Porcelain Tile Natural Rectified
Streamlined and contemporary, Neostile 2.0 Cementi delivers a refined cement-look aesthetic in a versatile 12×24 format. The natural matte surface softens reflections, while precise rectified edges support tight, consistent joints for a clean, modern layout across walls or floors.
Crafted in durable porcelain at 3/8" (9mm) thickness with a PEI 4 wear rating, this tile balances everyday practicality with design flexibility—ideal for kitchens, baths, and living areas, as well as commercial wall use. Frost resistance expands design possibilities to exterior facades in freeze–thaw climates.
Use it on its own for minimalist continuity or pair with complementary materials to build layered architectural detail. The Cementi tone coordinates effortlessly with warm and cool palettes alike.
Features
- Porcelain body for durability and easy maintenance
- Color: Cementi (cement-inspired gray tone)
- Finish: Natural (matte) surface
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 rectangular tile
- Thickness: 3/8" (9mm)
- PEI 4 wear rating for robust residential and light commercial use
- Frost resistant for freeze–thaw exterior wall applications
- Box coverage: 13.56 sq ft | 7 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Neostile 2.0 Cementi 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Verify substrate suitability, movement accommodation, and waterproofing/drainage where required for the application.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, sound, and flat within industry tolerances for large-format tile such as 12×24.
- Dry-lay to plan pattern, balance cuts, and align grout joints; avoid sliver cuts at perimeters.
- Blend material from multiple boxes to distribute any shade variation uniformly.
- Select joint width appropriate for rectified tile and design intent; include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain; follow manufacturer guidance for the substrate and environment.
- Key mortar into the substrate and comb in straight, parallel ridges; back-butter tiles as needed to improve coverage.
- Set tiles with a slight perpendicular motion to collapse ridges and achieve proper bond. Target coverage in line with standards (typically 80% interior, up to 95% for wet areas/exteriors).
- Use a tile leveling system where appropriate to help minimize lippage with 12×24 units.
- Allow mortar to cure per manufacturer instructions before grouting or subjecting the installation to light traffic.
Step 3: Cutting
- Cut using a wet saw with a premium diamond blade rated for porcelain.
- Support tiles fully during cuts and mark lines carefully to reduce chipping.
- Lightly ease sharp cut edges where they will be exposed.
Step 4: Joint Filling
- Choose a grout suitable for porcelain and the selected joint width; mix and apply per manufacturer instructions.
- Pack joints fully with a rubber float, clean diagonally, and remove any haze promptly with clean water.
- Use appropriate sealant at movement joints and all changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured as directed.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner suitable for porcelain; avoid acids and harsh abrasives.
- Use entry mats and protective pads to limit tracked-in grit and potential scratching.
- Follow grout and setting material manufacturers’ maintenance guidance; reseal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot-to-lot variations, and suitability for the intended application before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
