Kursaal Pure 12×24 Porcelain Tile Natural Rectified
Refined and understated, the Kursaal Pure 12×24 porcelain tile delivers a clean, modern look with a versatile natural (matte) surface. Precise rectified edges support tight, consistent grout joints for streamlined walls and floors.
Engineered in durable porcelain with a PEI 4 wear rating, Kursaal Pure balances style with everyday practicality for residential spaces and select commercial interiors. Frost resistance expands design options to exterior facades in freeze–thaw climates. Each box covers 15.5 sq ft (8 pieces), simplifying planning and estimating.
Use it for calm minimalism or as a neutral foundation that pairs easily with a variety of materials and finishes throughout the home or workplace.
Features
- Material: Porcelain
- Color: Pure
- Finish: Natural (matte)
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 format
- PEI 4 wear rating
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 15.5 sq ft per box | 8 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Light commercial interior floors
- Commercial interior walls
- Exterior walls/facades (freeze–thaw)
Installation Guide – Kursaal Pure 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, structurally sound, and flat within tolerances appropriate for 12×24 tile.
- Dry-lay to confirm layout, center the design, and avoid small perimeter cuts.
- Blend tiles from multiple boxes to evenly distribute shade and pattern variation.
- Use spacers suited to rectified tile and include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer‑modified thin-set mortar approved for porcelain tile.
- Key mortar into the substrate, then comb with an appropriate notched trowel; back-butter tiles as needed to improve contact.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve continuous mortar coverage per industry standards.
- Use a leveling system when helpful to minimize lippage on 12×24 installations.
- Allow mortar to cure per manufacturer recommendations before grouting or light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Mark cuts accurately and support the tile fully to reduce chipping.
- Ease exposed cut edges as needed for a smooth transition.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; follow manufacturer mixing and cure instructions.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use appropriate sealant at movement joints and all changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH‑neutral cleaner suitable for porcelain tile; avoid acids and harsh abrasives.
- Use entry mats and protective pads to reduce tracked-in grit and potential scratching.
- Follow grout and mortar manufacturers’ maintenance guidance; seal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot variations, and suitability for specific applications prior to installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
