Intricate Cenere Veincut 12×24 Porcelain Tile Matte Rectified
Refined and versatile, the Intricate Cenere Veincut 12×24 porcelain tile features a subtle linear veining that brings a contemporary stone-look character to interiors. The matte surface offers a softly understated sheen that complements modern and transitional palettes alike.
Precisely rectified edges support tight, consistent grout joints for clean lines across floors and walls. Crafted in durable porcelain, this 12×24 format balances design impact with everyday practicality and easy maintenance.
Use it on its own for a continuous, elegant field or pair with coordinating trims to complete edges and transitions throughout kitchens, baths, and living spaces.
Features
- Porcelain construction for durability and easy care
- Color: Cenere Veincut with linear, stone-look veining
- Finish: Matte
- Edge: Rectified for precise, consistent grout joints
- Format: 12×24 tile
- DCOF: 0.42 (wet)
- Coverage: 15.50 sq. ft. per box (approx. 1.94 sq. ft. per piece)
- Sale mode: Sold by the square foot
Recommended Applications
- Residential interior floors
- Residential interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Commercial interior walls
Installation Guide – Intricate Cenere Veincut 12×24 Porcelain Tile Matte Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA). Confirm substrate suitability, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, structurally sound, and flat within industry tolerances for large-format tile (12×24).
- Dry-lay to confirm layout, balance cuts, and align veining direction for a cohesive appearance.
- Blend tiles from multiple boxes to evenly distribute shade/pattern variation.
- Plan recommended movement joints per TCNA EJ171 and use spacers appropriate for rectified edges and the selected pattern.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain and large-format tile.
- Key mortar into the substrate and comb with a suitable notched trowel; back-butter tiles as needed to improve bond.
- Set tiles with a slight sliding motion to collapse ridges and achieve required coverage (typically 80–95% based on area and exposure).
- Use a leveling system where appropriate to help minimize lippage in large-format installations.
- Allow mortar to cure per manufacturer guidance before grouting or opening to light foot traffic.
Step 3: Cutting
- Cut using a wet saw with a premium diamond blade rated for porcelain.
- Mark cuts carefully and support the tile fully to reduce chipping.
- Ease sharp cut edges where they may be exposed.
Step 4: Joint Filling
- Select a grout compatible with porcelain and the chosen joint width; follow manufacturer directions for mixing and cure times.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use appropriate sealant at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner suitable for porcelain; avoid acids and harsh abrasives.
- Use entry mats and felt pads to reduce tracked-in grit and potential surface wear.
- Follow grout manufacturer maintenance guidance; seal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Verify actual materials and lot-to-lot variations, and confirm suitability for specific applications before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
