Eterna Bianco Tile 12″x24″ Honed – Grey Marble with Straight Edge
Modern Calm with Natural Elegance
Bring balance and modern refinement to your space with the Eterna Bianco Tile 12″x24″ Honed. This tile features a soft grey base accented by graceful veining. Its honed finish offers a smooth, matte feel that gently diffuses light, making it ideal for both intimate and open interiors.
Thanks to its 12″x24″ size and clean straight edges, this tile creates a seamless layout. It suits contemporary bathrooms, feature walls, and minimalist floors. Moreover, its muted tones work well with many styles—from Scandinavian to industrial. Whether used alone or with contrasting materials, it provides a calm, cohesive look.
Eterna Bianco Tile – Key Features
- Material: High-quality grey marble
- Finish: Honed – smooth, matte surface
- Color: Cool grey with flowing natural veining
- Size: 12″x24″ (30.5 x 61 cm)
- Thickness: 0.47″ (1.2 cm)
- Edge Detail: Straight edge for clean alignment
- Best For: Interior floors and walls, showers, vanities, and entryways
Design Suggestions
To enhance its soft grey tones, pair this tile with brushed metal, light oak, or white elements. For added contrast, choose darker grout. Because of its honed texture, it’s also a smart choice for wet areas where slip resistance matters. From spa bathrooms to gallery-style walls, this tile brings subtle luxury wherever it’s placed.
Installation Guide – Step by Step
Step 1: Surface Preparation – Ensure Stability & Flatness
- Clean the substrate thoroughly, removing debris, grease, or previous adhesives.
- Use a 10-ft straightedge to verify surface flatness within 1/8″.
- Apply self-leveling compound as needed for even large-format tile support.
- Use a waterproof membrane in wet areas like showers or bathrooms.
Step 2: Layout Planning – Symmetry & Tone Management
- Mark centerlines to ensure balanced layout and minimal awkward cuts.
- Dry-lay tiles to assess natural variation in the Eterna Bianco marble veining.
- Blend tiles from multiple boxes for consistent tone across the surface.
- Use **1/16″–1/8″ grout joints** to suit the straight edges and maintain a clean visual flow.
Step 3: Mortar Application – Choose White Thin-Set
Recommended Thin-Set Mortars:
- Mapei Ultraflex LFT White
- Laticrete 4-XLT White
- Ardex X5 or X77 White
Instructions:
- Spread mortar using a 1/2″ square-notched trowel.
- Back-butter each tile to ensure full contact and reduce voids.
- Apply adhesive in small sections to prevent premature setting.
Step 4: Cutting & Fitting – Accuracy is Key
- Use a wet saw with a diamond blade to make clean, accurate cuts.
- Polish any visible cut edges using a marble finishing pad.
- Dry-fit cut tiles before final installation to confirm alignment.
Step 5: Tile Placement – Prevent Lippage
- Use a tile leveling system to ensure smooth alignment and flat installation.
- Set tiles with light pressure and align carefully along chalk lines or spacers.
- Clean off excess mortar promptly with a damp sponge.
- Allow thin-set to cure for 24 hours before grouting.
Step 6: Grouting & Sealing – Protect the Surface
- Pre-seal honed marble tiles with a penetrating sealer before grouting.
- Use non-sanded grout to protect the honed surface from abrasion.
- Apply grout using a rubber float and work diagonally into joints.
- Clean off residue quickly and buff haze after 20–30 minutes.
- After grout cures (usually 72 hours), re-seal the tile surface for long-term protection.
Maintenance Tips – Preserve the Look
- Clean with pH-neutral, stone-safe products only.
- Re-seal tiles every 6–12 months depending on foot traffic and exposure.
- Wipe spills immediately to prevent stains or etching.
- Avoid abrasive pads or acidic cleaners.
Shipping & Packaging
Each 12″ x 24″ Eterna Bianco Honed Marble Tile is individually cushioned and protected for safe transport. Inspect before installation to confirm quality and consistency.
Important Note
Natural marble like Eterna Bianco may feature tonal and veining variation. Dry-lay before installation and blend tiles for visual balance. Stonemarket USA is not responsible for installation or natural variation issues.
