Blanco Polished 12×24 Porcelain Tile Rectified
Sleek and luminous, the Blanco Polished 12×24 porcelain tile delivers a crisp white look with a reflective, high‑gloss surface. Rectified edges support tight, consistent grout joints for a clean, contemporary layout on walls, backsplashes, and feature installations.
Crafted in durable porcelain with an approx. 8.8mm thickness, this tile balances style with everyday practicality. Frost resistance broadens design options to exterior facades in freeze–thaw climates. Its versatile 12×24 format coordinates easily with a range of finishes and materials, from warm woods to cool metals.
Technical notes: PEI 4 wear rating; DCOF 0.32 for the polished surface. Confirm local slip‑resistance requirements before considering any floor use, especially in wet areas.
Features
- Porcelain body for durability and easy care
- Color: White
- Finish: Polished (high‑gloss) surface
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 tile
- Approx. thickness: 8.8mm
- PEI 4 wear rating
- DCOF: 0.32 (polished) — verify suitability where slip resistance is required
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 11.63 sq. ft. per box | 6 pieces per box
Recommended Applications
- Residential interior walls
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Feature walls
- Exterior walls/facades (freeze–thaw)
Installation Guide – Blanco Polished 12×24 Porcelain Tile Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, structurally sound, and flat within industry tolerances for large‑format tile (like 12×24).
- Plan the layout by dry‑laying tiles and centering the design to minimize small perimeter cuts.
- Blend tiles from multiple boxes to evenly distribute any shade variation.
- Use appropriate spacers and a joint width consistent with rectified tile; include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer‑modified thin‑set mortar approved for porcelain and the tile’s format.
- Key mortar into the substrate, comb with an appropriate notched trowel, and back‑butter tiles as needed to improve coverage.
- Set tiles with a slight back‑and‑forth motion to collapse ridges and achieve proper bond; target coverage per application and location per industry standards.
- Use a leveling system when needed to help minimize lippage with larger‑format installations.
- Allow mortar to cure per manufacturer instructions before grouting or allowing traffic.
Step 3: Cutting
- Cut with a wet saw and a premium diamond blade designed for porcelain.
- Mark cuts carefully and support the tile fully to reduce chipping.
- Protect and clean the polished surface during cutting; ease sharp cut edges where exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; confirm compatibility with polished finishes to avoid surface abrasion.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use appropriate movement joints and sealants at changes of plane; do not grout these areas.
- Protect the installation until grout has cured per manufacturer guidance.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH‑neutral cleaner suitable for porcelain; avoid acids or harsh abrasives, especially on polished surfaces.
- Use entry mats and felt pads where appropriate to minimize tracked‑in grit and potential scratching.
- Follow grout and setting material manufacturers’ maintenance recommendations; reseal cementitious grout if advised.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot‑to‑lot variations, and suitability for specific applications, including slip‑resistance requirements for floors, before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
