Baltimore Perla 12×24 Porcelain Tile Natural Rectified
Understated and versatile, the Baltimore Perla 12×24 porcelain tile delivers a soft, neutral tone with a natural matte surface. The 12×24 format helps reduce grout lines for a cleaner look, while rectified edges support tight, consistent joints across walls or floors.
Crafted in durable porcelain with a PEI 4 wear rating, this tile balances everyday practicality with design flexibility—ideal for kitchens, baths, living areas, and commercial wall applications. Frost resistance also supports exterior wall facades in freeze–thaw climates. The refined Perla shade pairs easily with a wide range of finishes and materials.
Sold in square feet for straightforward planning and estimating.
Features
- Porcelain body for durability and easy care
- Color: Perla
- Finish: Natural (matte) surface
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 tile
- PEI 4 wear rating for robust residential use and light commercial floors
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 11.62 sq. ft. per box | 6 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Baltimore Perla 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (e.g., ANSI A108/A118 and TCNA guidelines). Ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, structurally sound, and flat within tolerances for 12×24 tile.
- Dry-lay to confirm layout, balance cuts, and align grout joints with the design intent.
- Blend tiles from multiple boxes to distribute any shade/pattern variation evenly.
- Select a joint width appropriate for rectified tile and include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain and for the tile size.
- Key mortar into the substrate, then comb with an appropriate notched trowel; back-butter tiles as needed to improve coverage.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve proper bond; target coverage per industry guidelines for the application and location.
- Use a tile leveling system when needed to help minimize lippage with larger formats.
- Allow mortar to cure per manufacturer instructions before grouting or light traffic.
Step 3: Cutting
- Cut with a wet saw and a high-quality diamond blade designed for porcelain.
- Mark cuts carefully and support the tile fully to reduce chipping.
- Ease sharp cut edges where they will be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; mix and apply per manufacturer guidance.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly.
- Use sealant at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner suitable for porcelain tile; avoid acids and harsh abrasives.
- Use entry mats and protective pads under furniture to reduce grit and scratching.
- Follow grout manufacturer maintenance guidance; reseal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Always confirm actual materials, lot-to-lot variations, and suitability for specific applications before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
