Clipped Diamond Dolomite Marble Mosaic Tile – Polished Finish for Modern Elegance
Transform your home with this premium mosaic featuring the timeless beauty of dolomite and soft gray natural marble. The refined clipped diamond pattern brings modern sophistication to kitchens, bathrooms, and feature walls. Its polished finish enhances the natural veining and creates a luminous surface that complements both contemporary and classic interiors.
Designed for homeowners, designers, and builders, this tile is mesh-mounted for easy installation. It’s perfect for wet and dry areas, offering a high-end look that lasts. With its elegant blend of white and gray, it pairs seamlessly with any color palette and adds a touch of luxury to every room.
Ideal Applications
- Kitchen backsplashes and accent walls
- Bathroom and shower surrounds
- Fireplace surrounds and living room features
- Commercial spaces and hotel lobbies
Product Details
- Material: Dolomite and gray natural marble
- Finish: Polished
- Color: White and soft gray mix
- Pattern: Clipped Diamond design
- Sheet Size: 10.4″ x 12″ (26.5 x 30.5 cm)
- Weight per Box: Approx. 5.02 lbs
- Packaging: 5 sheets per box
- Installation: Mesh-mounted for easy installation
- SKU: CD-DOL-001
- Use: Indoor walls in wet or dry areas
Why You’ll Love It
- Dynamic clipped diamond shape for modern luxury
- Polished finish that highlights natural stone veining
- Elegant blend of white and gray tones for versatility
- Easy-to-install mesh backing for a seamless look
- Low maintenance and long-lasting beauty
Short Description
This clipped diamond design blends modern geometry with polished elegance. Perfect for kitchens, bathrooms, and accent walls, it brings a touch of luxury to any space.
White Dolomite Clipped Diamond Mosaic Tile – Polished Finish Installation Guide
Maximize Beauty & Longevity with Professional Installation
Ensure the best performance and a timeless finish by following this expert installation guide for your White Dolomite Clipped Diamond Mosaic Tile. These steps help preserve the tile’s polished surface and elegant clipped diamond design.
Step 1: Surface Preparation – Start with a Solid Foundation
- Ensure the surface is clean, dry, and free from dust, grease, or soap film.
- Check that the substrate is level, solid, and free from cracks or loose areas.
- Apply a waterproofing membrane in wet areas like showers or backsplashes.
- Remove baseboards or other obstacles before starting.
- Use a self-leveling compound to correct uneven areas if necessary.
Step 2: Layout Planning – Achieve Visual Balance
- Measure the wall or surface and mark the center point for layout symmetry.
- Snap chalk lines to create a grid that guides sheet placement.
- Dry-lay the sheets to preview the alignment of the clipped diamond pattern.
- Adjust layout to avoid small cuts at the edges.
- Use 1.5–3mm spacers to maintain consistent grout lines.
Step 3: Adhesive Application – Use White Thin-Set Mortar
Recommended mortars:
Application steps:
- Mix only the amount of thin-set mortar you can apply within 30 minutes.
- Apply mortar with the flat side of a 1/4″ notched trowel for even coverage.
- Comb the mortar using the notched side at a 45° angle.
- Back-butter each sheet to enhance adhesion and reduce voids.
Step 4: Cutting & Fitting – Keep the Pattern Seamless
- Use a wet saw with a diamond blade to achieve clean cuts without chipping.
- Mark cuts clearly using a pencil or wax marker for accuracy.
- Soften sharp edges with a rubbing stone to prevent damage during grouting.
- Dry-fit all pieces before securing to ensure perfect alignment.
Step 5: Setting the Tiles – Maintain Alignment
- Start tiling from the center and work outward for a balanced look.
- Gently press each mesh-backed sheet into the thin-set using a slight twisting motion.
- Avoid sliding the sheets after placing them to maintain the clipped diamond pattern.
- Use spacers to ensure consistent spacing between sheets.
- Tap gently with a rubber mallet to level the surface as needed.
- Wipe away excess mortar with a damp sponge immediately.
- Allow adhesive to cure for at least 24 hours before grouting.
Step 6: Grouting & Sealing – Protect the Finish
- Use unsanded grout to prevent scratching the polished dolomite surface.
- Apply grout diagonally with a rubber float for even coverage.
- Wipe away excess grout promptly with a damp sponge to avoid haze.
- After 15–20 minutes, buff the surface gently with a soft cloth.
- Allow grout to cure for at least 72 hours before sealing.
- Apply a penetrating, pH-neutral stone sealer to protect against moisture and stains.
Maintenance Recommendations
- Clean with a pH-neutral, stone-safe cleaner to preserve the polished finish.
- Avoid acidic or abrasive cleaners that can etch or damage dolomite marble.
- Seal the surface periodically, depending on usage, to maintain its appearance and resistance to moisture.
- Use felt pads under furniture or fixtures near tiled areas to prevent scratches.
