2″ Honeycomb Beige Limestone Honed Mosaic Tile –
Natural Limestone Mosaic with Geometric Appeal
This 2-inch mosaic tile showcases smooth beige limestone arranged in a clean honeycomb pattern. The honed finish creates a matte texture that complements both contemporary and rustic interiors. With its refined tones and geometric format, it’s a favorite for adding natural elegance to walls and backsplashes.
Key Features
- Material: Natural limestone
- Color: Warm beige with organic surface texture
- Chip Size: 2″ hexagon
- Finish: Honed – non-reflective and soft to the touch
- Sheet Size: 10.4″ x 12″ (26.5 x 30.5 cm)
- Installation: Mesh-mounted for precise placement
- Recommended Use: Bathroom walls, vanities, kitchen backsplashes, and feature areas
Why Choose This Tile?
Unlike glazed ceramic alternatives, this limestone tile offers authentic texture and subtle tonal variation. Its hexagon layout brings balance to curved or angular design themes, while the honed surface reduces glare and enhances warmth under light.
Packaging & Coverage
- Box includes 5 mesh-mounted sheets
- Total coverage: Approx. 4.35 sq.ft.
- Net weight: Approx. 25.1 lbs
- Safely packaged for shipping and storage
Installation Guide – Step by Step
Step 1: Surface Preparation – Start with a Clean Foundation
- Clean and dry the surface; eliminate dust, oil, and residue
- Ensure the substrate is level, solid, and crack-free
- Apply waterproofing membrane for wet areas such as showers
- Remove trims or outlet covers that obstruct sheet layout
- Use a leveling compound where needed
Step 2: Layout Planning – Maintain Balance
- Find the center of the wall or surface for layout symmetry
- Dry-lay the sheets to preview veining consistency and flow
- Adjust placement to avoid awkward cuts at the edges
- Use 1.5–3 mm spacers between sheets for uniform grout spacing
Step 3: Adhesive Application – Choose a Reliable Thin-Set
Recommended Brands:
Instructions:
- Mix small batches usable within 30 minutes
- Apply with the flat side of a 1/4″ notched trowel
- Comb mortar at a 45° angle for optimal coverage
- Back-butter sheets for stronger adhesion
- Work in sections to avoid premature drying
Step 4: Cutting & Fitting – Stay Accurate
- Use a wet saw with a fine diamond blade
- Mark cuts with precision using a pencil
- Smooth edges using a stone file or rubbing block
- Dry-fit before securing tiles permanently
Step 5: Setting Tiles – Keep the Pattern Consistent
- Start from the center and work outward
- Press mesh-backed sheets firmly into thin-set
- Use spacers to maintain spacing
- Level with a rubber mallet as needed
- Clean excess thin-set with a damp sponge
- Allow 24 hours to cure before grouting
Step 6: Grouting & Sealing – Finish with Care
- Use non-sanded grout to protect polished marble
- Apply diagonally with a rubber float
- Wipe grout residue immediately
- Buff haze after 15–20 minutes
- Let cure for 72 hours
- Seal with a penetrating marble-safe sealer
Maintenance Tips – Keep It Looking New
- Use only pH-neutral cleaners
- Avoid harsh and acidic substances
- Reseal as needed based on use and exposure
- Use felt pads under nearby furniture
Shipping & Packaging:
Each mosaic sheet is individually protected to minimize breakage. In addition, mesh backing provides alignment support during application.
Important Note
Stonemarket USA is not responsible for improper installation. We strongly recommend hiring professionals and using premium adhesives and sealers for best results.
