Mun Rust 12×24 Porcelain Tile Natural Rectified
Grounded and contemporary, the Mun Rust 12×24 porcelain tile delivers a warm rust tone with a soft natural (matte) surface. The color brings depth and character to modern and transitional spaces, balancing rich earthiness with a refined finish.
Engineered in durable porcelain, this 12×24 format reduces grout lines for a cleaner visual field, while rectified edges support tight, consistent joints. With a PEI 4 wear rating and a DCOF greater than 0.42, it’s designed for everyday performance in busy residential areas and select light-commercial interiors. Frost resistance extends design possibilities to exterior wall facades in freeze–thaw climates.
Use Mun Rust on its own for a cohesive, monochromatic statement or pair it with coordinating trims and surfaces to build layered architectural detail throughout kitchens, baths, and living areas.
Features
- Porcelain body for durability and easy maintenance
- Color: Rust
- Finish: Natural (matte) surface
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 large-format tile
- Thickness: 3/8 in. (9mm)
- PEI 4 wear rating for robust residential use
- DCOF: >0.42
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 9.69 sq. ft. per box | 5 pieces per box | approx. 1.938 sq. ft. per piece
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Mun Rust 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, structurally sound, and flat within tolerances appropriate for 12×24 tile.
- Dry-lay to plan layout, balance cuts, and align patterns; avoid narrow slivers at perimeters.
- Blend tiles from multiple boxes to distribute shade variation evenly.
- Use spacers consistent with rectified tile and include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain and the tile’s size.
- Key mortar into the substrate, comb with an appropriate notch, and back-butter tiles as needed to improve coverage.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve proper bond; target coverage per industry standards for the area of use.
- Use a leveling system if needed to help minimize lippage on larger-format installations.
- Allow mortar to cure per manufacturer instructions before grouting or light traffic.
Step 3: Cutting
- Cut with a wet saw and a premium diamond blade rated for porcelain.
- Mark and support tiles carefully to reduce chipping; ease sharp cut edges where they will be exposed.
- Drill holes with diamond core bits at low speed and with adequate cooling as needed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; follow product mixing and cure guidelines.
- Pack joints fully with a rubber float, clean diagonally across the tile, and remove haze promptly with clean water.
- Use appropriate sealant at changes of plane and movement joints; do not grout these areas.
- Protect the installation from traffic until grout has cured per manufacturer instructions.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner suitable for porcelain tile; avoid harsh acids or abrasives.
- Use entry mats and felt pads to limit tracked-in grit and furniture abrasion.
- Follow grout manufacturer maintenance guidance; reseal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Always verify actual materials, lot-to-lot variations, and suitability for the intended application before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
