Capraia Sand Polished 12×24 Porcelain Tile Rectified
Refined and modern, the Capraia Sand polished 12×24 porcelain tile brings a warm, elegant tone with a mirror-smooth finish. The 12×24 format reduces grout lines for a clean, contemporary look, while rectified edges support tight, consistent joints across walls or floors.
Engineered in durable porcelain with a PEI 4 wear rating, this tile balances style with everyday practicality. A DCOF of 0.43 provides traction data for planning interior floor use, and frost resistance supports exterior wall applications in freeze–thaw climates. Use it on its own for a sleek statement or coordinate with complementary materials for layered design.
Designed for residential spaces and select light commercial interiors, Capraia Sand offers lasting beauty in kitchens, baths, living areas, feature walls, and more.
Features
- Porcelain body for durability and easy care
- Color: Sand
- Finish: Polished
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 format
- Thickness: 3/8 in. (9mm)
- PEI rating: 4
- DCOF: 0.43 (wet)
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 11.62 sq. ft. per box | approx. 1.94 sq. ft. per piece | 6 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Capraia Sand Polished 12×24 Porcelain Tile Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Confirm substrate suitability, movement accommodation, and required waterproofing/drainage for wet or exterior areas.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, sound, and flat within industry tolerances for 12×24 tile.
- Plan the layout by dry-laying tiles to center the design and minimize small perimeter cuts.
- Blend tiles from multiple boxes to distribute any shade or pattern variation.
- Use appropriate spacers and plan movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain and for the tile size.
- Key mortar into the substrate, then comb with an appropriate notched trowel; back-butter tiles as needed to improve coverage.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve proper bond; target coverage per industry requirements for the space (higher in wet/exterior areas).
- Use a leveling system if needed to help minimize lippage on larger-format installations.
- Allow the setting material to cure per manufacturer instructions before grouting or opening to light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Mark cuts accurately and support the tile to minimize chipping.
- Ease sharp cut edges where they will be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; follow manufacturer guidance for mixing, application, and cure.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use flexible sealant at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner suitable for porcelain tile; avoid acids and harsh abrasives.
- Use entry mats and protective pads to minimize grit and scratching.
- Maintain grout per manufacturer guidance; seal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Verify actual materials and lot characteristics prior to install. Confirm suitability for specific applications and site conditions. Stone Market USA is not responsible for issues from improper installation or handling.
