Dolomite Beige 12×24 Porcelain Tile Natural Rectified
Warm and versatile, the Dolomite Beige 12×24 porcelain tile brings a soft neutral tone with a natural matte surface. The elongated 12×24 format reduces visual grout lines for a clean, contemporary layout, and rectified edges support tight, consistent joints.
Engineered in durable porcelain with a PEI 4 wear rating and 3/8-inch (10mm) thickness, this tile balances style with everyday practicality. Frost resistance broadens design options to exterior facades in freeze–thaw climates while keeping maintenance simple for busy interiors.
Use it across floors and walls for a cohesive backdrop, or mix with complementary materials to build nuanced, architectural detail.
Features
- Porcelain body for durability and easy care
- Color: Beige
- Finish: Natural (matte) surface
- Rectified edges for precise, narrow grout joints
- Size: 12×24 tile format
- Thickness: 3/8 inch (10mm)
- PEI 4 wear rating for robust residential use
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 11.62 sq. ft. per box | 6 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Dolomite Beige 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the product manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Verify substrate suitability, flatness, and movement accommodation. Use appropriate waterproofing/drainage where required.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, structurally sound, and flat within tolerances for large-format tile.
- Plan the layout by dry-laying tiles to balance cuts and avoid narrow slivers at perimeters.
- Blend tiles from multiple boxes to evenly distribute any shade variation.
- Use spacers suited to rectified tile and include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain and large-format tiles.
- Key mortar into the substrate, then comb with an appropriate notched trowel; back-butter tiles as needed to improve coverage.
- Set tiles with a slight back-and-forth motion to collapse ridges and promote bond. Achieve coverage consistent with standards for the application and location.
- Use a leveling system where helpful to minimize lippage with large-format installations.
- Allow mortar to cure per manufacturer instructions before grouting or light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade designed for porcelain.
- Mark cuts carefully and support the tile fully to reduce chipping.
- Ease sharp cut edges where they will be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; follow manufacturer directions for mixing, application, and cure times.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use appropriate sealants at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner suitable for porcelain tile; avoid acids or harsh abrasives.
- Use entry mats and felt pads where appropriate to minimize tracked-in grit and scratching.
- Follow grout and mortar manufacturers’ maintenance guidance; reseal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot variations, and suitability for the intended application before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
