Kobe Calacatta Viola 12×24 Porcelain Tile Natural Rectified
The Happy Floors Kobe Calacatta Viola 12×24 porcelain tile pairs a sophisticated stone-look aesthetic with a smooth natural (matte) surface. Its rectified edges support narrow, consistent grout joints, helping the 12×24 format read clean and contemporary across floors and walls.
Engineered in durable porcelain with a 3/8 in (10mm) thickness, Kobe Calacatta Viola offers everyday practicality alongside design flexibility. A PEI 4 wear rating and a 0.50 DCOF support confident use in active interiors, while frost resistance opens opportunities for exterior walls and select outdoor floor spaces in freeze–thaw climates.
Use it as a refined field tile on its own or mix with complementary materials to create layered details. The natural finish delivers a low-sheen look that coordinates easily with a range of fixtures and finishes.
Features
- Material: Porcelain for durability and easy maintenance
- Color: Calacatta Viola
- Finish: Natural (matte) surface
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 field tile
- Thickness: 3/8 in (10mm)
- PEI 4 wear rating
- DCOF: 0.50 (wet)
- Frost resistant for freeze–thaw exterior applications
- Sold by square foot; box coverage 9.69 sq. ft. | 5 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Shower floors
- Outdoor floors
- Outdoor walls
Installation Guide – Kobe Calacatta Viola 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Verify substrate suitability, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, structurally sound, and flat within tolerances for large-format tile.
- Dry-lay to plan layout, balance cuts, and center the design in key sightlines.
- Blend tiles from multiple boxes to distribute any shade/pattern variation evenly.
- Use spacers appropriate for rectified tile and include movement joints per TCNA EJ171, especially at perimeters, changes of plane, and transitions.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain and, where needed, for large-format tile.
- Key mortar into the substrate, then comb in straight lines with a suitable notched trowel; back-butter tiles to improve coverage.
- Set tiles with a slight back-and-forth motion to collapse ridges; achieve coverage levels appropriate to the area (typically 80–95%).
- Use a leveling system as needed to help minimize lippage on 12×24 installations.
- Allow mortar to cure per manufacturer instructions before grouting or traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Mark cuts carefully and support the tile fully to reduce chipping.
- Ease sharp cut edges where they will be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; follow manufacturer mixing and application guidelines.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly.
- Use appropriate sealant at movement joints and all changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured per manufacturer guidance.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner formulated for porcelain tile; avoid acids and harsh abrasives.
- Use entry mats and protective glides to minimize tracked grit and scratching.
- Follow grout manufacturer recommendations for sealing and maintenance of cementitious grout, if applicable.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot-to-lot variation, and suitability for specific applications prior to install. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
