Berwyn Bluestone 12×24 Porcelain Tile Natural Rectified
Understated and contemporary, Berwyn Bluestone delivers the cool, stone‑inspired character of bluestone in a refined 12×24 porcelain format. The natural matte surface provides a soft, low‑sheen look that complements a wide range of palettes and design styles.
Rectified edges enable clean, consistent grout joints for a streamlined layout across walls or floors. Crafted in durable porcelain with a PEI 4 wear rating and a DCOF of 0.42, it balances everyday practicality with elevated style. Frost resistance further expands design possibilities to exterior facades in freeze–thaw climates.
Use Berwyn Bluestone as a calm, architectural backdrop or pair it with contrasting materials to build layered detail in kitchens, baths, and living spaces.
Features
- Porcelain body for durability and easy care
- Color: Bluestone tone
- Finish: Natural (matte) surface
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 rectangular tile
- PEI 4 wear rating for robust residential use and light commercial floors
- DCOF: 0.42
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 13.56 sq. ft. per box | 7 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Berwyn Bluestone 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Verify substrate suitability, movement accommodation, and waterproofing/drainage where required for the application.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, structurally sound, and flat within industry tolerances for the tile size.
- Dry‑lay tiles to plan layout, balance cuts, and align joints; center the design to avoid narrow perimeter pieces.
- Blend product from multiple boxes to distribute any shade or pattern variation.
- Use spacers consistent with rectified tile and include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer‑modified thin‑set mortar approved for porcelain tile and the intended substrate.
- Key mortar into the substrate, then comb uniformly with an appropriate notched trowel; back‑butter tiles as needed to improve coverage.
- Set tiles with a slight perpendicular motion to collapse ridges and achieve proper bond; meet or exceed coverage requirements for the area of use.
- Use a leveling system if needed to help control lippage, especially with larger formats and aligned patterns.
- Allow mortar to cure per manufacturer guidance before grouting or subjecting the installation to traffic.
Step 3: Cutting
- Cut using a wet saw with a premium diamond blade rated for porcelain.
- Mark cuts carefully and support the tile fully to minimize chipping.
- Ease sharp cut edges where they will be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; mix and apply per manufacturer instructions.
- Pack joints fully with a rubber float; clean diagonally and remove haze promptly with clean water.
- Use appropriate sealant at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured as directed.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH‑neutral cleaner suitable for porcelain; avoid harsh acids or abrasives.
- Use entry mats and protective pads to reduce tracked‑in grit and potential scratching.
- Follow grout manufacturer maintenance recommendations; seal cementitious grout if advised.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot variations, and suitability for specific applications before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
