Crash Blue 12×24 Porcelain Tile Polished Rectified
Sleek and modern, Crash Blue brings a refined blue tone and a high-polish surface to contemporary interiors. The 12×24 format creates streamlined layouts with fewer grout lines, while crisp rectified edges support tight, consistent joints for a sophisticated finish.
Crafted in durable porcelain, this tile is engineered for everyday practicality with easy-care performance. Frost resistance opens up design possibilities for exterior facades in freeze–thaw climates, and the polished surface adds a luminous touch to feature walls, baths, and living spaces.
Use Crash Blue on its own for a bold, monochromatic statement or coordinate with neutrals and metals to build layered, architectural detail across walls, floors, and accents.
Features
- Porcelain body for durability and easy maintenance
- Color: Blue
- Finish: Polished
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 rectangular tile
- PEI 4 wear rating
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 11.63 sq. ft. per box | 6 pieces per box
- Estimated coverage per piece: 1.94 sq. ft.
Recommended Applications
- Residential interior floors
- Residential interior walls
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Crash Blue 12×24 Porcelain Tile Polished Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Confirm substrate suitability, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, sound, and flat within tolerances appropriate for 12×24 tile.
- Plan the layout by dry-laying tiles to balance cuts and align joints; avoid small slivers at perimeters.
- Blend material from multiple boxes to distribute any shade/pattern variation evenly.
- Select a joint width appropriate for rectified tile, and include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain tile and the project conditions.
- Key mortar into the substrate, then comb with an appropriate notched trowel. Back-butter tiles as needed to improve contact.
- Set tiles with a slight back-and-forth motion to collapse ridges and achieve proper coverage; follow industry coverage requirements for the application and location.
- Use a tile leveling system when helpful to minimize lippage on 12×24 installations.
- Allow mortar to cure per manufacturer instructions before grouting or light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Mark cuts carefully and support the tile fully to reduce chipping.
- Ease sharp cut edges where they will be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; follow manufacturer mixing and cure times.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use appropriate sealants at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner formulated for porcelain tile; avoid acids and harsh abrasives.
- Use entry mats and furniture glides to limit tracked grit and scratching.
- Follow grout manufacturer maintenance guidance; seal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Always verify actual materials, lot-to-lot variations, and suitability for specific applications before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
