Acorn Pecan 9×36 Natural Wood Look Porcelain Tile
Warm pecan tones and lifelike grain bring the character of natural hardwood to your design in a durable porcelain body. Acorn Pecan captures the nuanced movement of wood with a refined, matte natural finish that reads sophisticated and inviting across vertical surfaces.
The elongated 9×36 plank format emphasizes linear flow for a continuous, wood-inspired look. Rectified edges support crisp lines and tighter grout joints, helping create clean, contemporary installations on accent walls, backsplashes, and other statement-making features.
Crafted in porcelain for low-maintenance care and dependable performance, this tile is frost resistant for added confidence in properly detailed exterior vertical applications. With a rated DCOF >0.42 and a PEI of 0, Acorn Pecan is recommended for wall use; confirm project suitability with your installer and local codes.
Features
- Collection: Acorn
- Color: Pecan
- Material: Porcelain
- Size: 9×36 plank
- Finish: Natural (matte)
- Edge type: Rectified
- DCOF: >0.42
- PEI rating: 0
- Frost resistant
- Wood-look design with warm pecan tones and realistic grain
- Coverage per box: 13.08 sq ft
- Vendor SKU: 7085-R
Recommended Applications
- Interior feature walls and accent panels
- Kitchen backsplashes
- Fireplace surrounds (follow local code/clearance requirements)
- Commercial interior walls (per code and usage requirements)
- Exterior vertical cladding in freeze–thaw conditions when installed to recognized standards and with proper detailing (not for horizontal traffic surfaces)
- Shower and bath walls when installed over appropriate waterproofing
Installation Guide – Acorn Pecan 9×36 Natural Wood Look Porcelain Tile
Important Advisory
Always follow manufacturer instructions, ANSI A108 standards, TCNA guidelines (including EJ171 for movement joints), and local building codes. Verify substrate suitability, flatness, and load capacity. This product has a PEI rating of 0 and is intended for wall applications. Use appropriate waterproofing in wet areas and proper exterior detailing in freeze–thaw climates.
Step 1: Layout & Planning
- Verify substrate is flat, plumb, clean, and dry before layout begins.
- Establish control lines with chalk to keep courses straight and balanced on the wall.
- Dry-lay and blend tiles from multiple boxes to distribute shade and pattern variation for a natural wood-look appearance.
- For plank installations, avoid excessive offset; a maximum 1/3 (33%) stagger is commonly recommended unless otherwise directed by the manufacturer to reduce lippage risk with large formats. Maintain the manufacturer-recommended minimum grout joint for rectified tile and plan for perimeter and movement joints per EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain and large/elongated formats. Select a trowel that achieves full coverage based on substrate conditions.
- Key mortar into the substrate and comb in straight, parallel ridges. Back-butter planks as needed to improve bond and coverage, especially on large or rectified pieces.
- Set tiles with a slight perpendicular motion to the trowel ridges to collapse mortar and ensure proper transfer. Periodically lift a tile to verify coverage.
- Use a tile leveling system when appropriate to help minimize lippage on elongated planks.
- Clean mortar squeeze-out from joints and surface before it cures. Allow the installation to cure per mortar manufacturer instructions before grouting or exposing to service.
Step 3: Cutting
- Use a professional wet saw with a diamond blade suitable for porcelain to achieve clean, accurate cuts.
- Measure carefully, mark cut lines clearly, and dry-fit cut pieces before setting.
- Support long, narrow cuts to prevent chipping or breakage and handle elongated planks with care.
- Wear appropriate PPE, including eye and hearing protection.
Step 4: Joint Filling
- Select a grout compatible with porcelain and the chosen joint width. Follow manufacturer recommendations for joint size with rectified edges.
- Pack grout fully into joints using a rubber float, then clean with a damp sponge per grout instructions, refreshing rinse water frequently.
- Honor all movement joints and transitions with appropriate sealant; do not fill these with rigid grout.
- Allow grout to cure fully before routine cleaning or exposure to moisture.
Step 5: Cleaning & Maintenance
- Dust or vacuum surfaces regularly to remove grit.
- Clean with a pH-neutral cleaner approved for porcelain tile; rinse thoroughly and dry with a soft cloth.
- Avoid harsh abrasives, acids, or oil-based cleaners that may affect grout or finishes.
- Porcelain tile generally does not require sealing; consult the grout manufacturer regarding grout sealers if desired.
- Use protective pads where applicable and implement mats in entry areas to reduce tracked debris.
Disclaimer
Installation conditions vary. Always follow manufacturer instructions, ANSI/TCNA standards, and local building codes. Verify suitability for the intended application, especially in wet or exterior environments. Color, shade, and pattern variation are inherent to wood-look designs—open and blend multiple boxes. Stone Market USA is not responsible for installation practices, substrate conditions, or jobsite variables.
