Utah Granite 12×24 Porcelain Tile Natural Pressed
Grounded and versatile, the Utah Granite 12×24 porcelain tile brings a refined stone-inspired look with a soft natural (matte) surface. The 12×24 format streamlines layouts for modern continuity across floors and walls, while pressed edges deliver classic, consistent grout joints.
Engineered in durable porcelain with a PEI 4 wear rating and frost resistance, this tile balances everyday practicality with clean design. A high 0.74 DCOF helps promote confident footing when properly installed—ideal for busy residential spaces and select light commercial interiors, as well as exterior facades in freeze–thaw climates.
Use it as a standalone field tile or pair with complementary materials to build layered, architectural detail from kitchens and baths to living areas and feature walls.
Features
- Porcelain body for durability and low maintenance
- Color: Granite
- Finish: Natural (matte) surface
- Edge: Pressed for classic grout joints
- Size: 12×24 format
- PEI 4 wear rating for robust residential and light commercial use
- DCOF: 0.74 (wet)
- Frost resistant for freeze–thaw conditions
- Coverage: 14.2 sq. ft. per box | 7 pieces per box | 2.028571 sq. ft. per piece
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Utah Granite 12×24 Porcelain Tile Natural Pressed
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Confirm substrate suitability, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, sound, and flat within industry tolerances for the selected tile size.
- Dry-lay to plan layout, balance cuts, and align pattern or shade; mix tiles from multiple boxes for even distribution.
- Select a grout joint appropriate for pressed-edge tile and include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain tile.
- Key mortar into the substrate and comb in straight, parallel ridges with an appropriate notched trowel; back-butter as needed to improve coverage.
- Set tiles with a slight back-and-forth motion to collapse ridges; achieve coverage levels required by application and location.
- Use a leveling system if needed to help minimize lippage on larger-format installations.
- Allow mortar to cure per manufacturer instructions before grouting or light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Support the tile fully, mark cuts accurately, and ease sharp cut edges where exposed.
- Drill penetrations with diamond-tipped bits at low speed and with adequate cooling.
Step 4: Joint Filling
- Choose a grout suitable for porcelain and the selected joint width; follow manufacturer mixing and cure times.
- Pack joints completely with a rubber float, clean diagonally, and remove haze promptly.
- Use appropriate sealant at movement joints and all changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner approved for porcelain tile; avoid acids and harsh abrasives.
- Use entry mats and protective pads under furnishings to reduce abrasion from grit.
- Follow grout manufacturer maintenance guidance; seal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Verify actual materials, lot variations, and suitability for the intended application before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
