Titan Ivory Touch Glossy 4×12 Ceramic Tile
Titan Ivory Touch Glossy 4×12 Ceramic Tile by Happy Floors brings a warm ivory tone and reflective glossy surface to interior wall designs. Part of the Titan Collection, this ceramic tile offers a clean, elongated format with pressed edges and a refined finish for kitchens, bathrooms, backsplashes, and decorative applications.
The 4×12 size supports a range of layouts, including horizontal, vertical, stacked, and offset patterns. Its light ivory color coordinates easily with contemporary, transitional, and classic interiors, while the glossy finish adds brightness and visual depth to the finished space.
As with any tile installation, review material from multiple boxes before setting to account for possible variation in color and appearance. Plan the layout carefully to create a balanced result across the completed surface.
Features
- Ceramic construction for interior tile installations
- Titan Collection by Happy Floors
- Warm ivory color
- Glossy finish with a light-reflective surface
- 4×12 format
- 3/8 inch (9 mm) thickness
- Pressed edge type
- PEI rating of 3
- Approximately 0.326 sq. ft. of coverage per piece
- 33 pieces per box
- 10.76 sq. ft. of coverage per box
Recommended Applications
- Interior residential walls
- Interior commercial walls
- Kitchen backsplashes
- Bathroom walls
- Decorative accent walls
- Shower walls when the complete installation system and substrate are properly specified for the application
Installation Guide – Titan Ivory Touch Glossy 4×12 Ceramic Tile
Important Advisory
Inspect all tile before installation to confirm color, finish, size, and overall appearance. Do not install material with visible defects. Follow Happy Floors product instructions, setting-material manufacturer requirements, applicable local building codes, and recognized tile-industry standards. Confirm that the selected substrate and complete installation system are appropriate for the intended location.
Step 1: Layout & Planning
- Confirm the installation area is suitable for this ceramic tile and determine the required layout before setting material.
- Establish level and plumb reference lines to guide the installation and maintain consistent alignment.
- Dry-lay tiles from multiple boxes to review the ivory color, glossy finish, and any variation before installation.
- The 4×12 format can be arranged horizontally, vertically, in stacked layouts, in offset patterns, or in other planned wall designs.|Use a grout-joint width appropriate for the tile, substrate, layout, and recommendations of the tile, mortar, and grout manufacturers. Plan movement accommodation where required by the installation conditions.
Step 2: Tile Installation
- Prepare a clean, dry, flat, stable, and structurally sound substrate free from dust, grease, paint, and other bond-inhibiting materials.
- Repair cracks, uneven areas, or damaged substrate conditions before beginning installation. In wet areas, coordinate any required waterproofing system with the substrate and overall installation design.
- Use a quality mortar suitable for ceramic tile, the substrate, and the specific installation environment. Select the mortar and trowel method according to manufacturer instructions.
- Apply mortar evenly within the recommended working time, then press each tile firmly into place to achieve proper contact. Periodically remove a tile to verify mortar transfer and coverage.
- Use spacers or another approved method to maintain the planned joint alignment. Check courses and patterns frequently, particularly in stacked, vertical, or offset layouts.
Step 3: Cutting
- Use a professional tile cutter, wet saw, or other tool equipped for glazed ceramic tile.
- Measure, mark, and dry-fit cut pieces before final placement.
- Handle cut edges carefully to reduce chipping of the glossy surface.
- Use appropriate ceramic-tile tools for outlet openings, plumbing penetrations, and other detailed cuts.
Step 4: Joint Filling
- Allow the setting material to cure according to the mortar manufacturer’s instructions before grouting.
- Select grout compatible with glazed ceramic tile, the planned joint width, and the installation environment.
- Work grout into the joints using an appropriate float, then remove excess grout promptly with a clean, damp sponge without overwetting the joints.
- After the grout has cured, remove remaining haze using a cleaning method approved for glazed ceramic tile. Follow the grout manufacturer’s guidance regarding whether sealing is appropriate for the grout.
Step 5: Cleaning & Maintenance
- Clean the glossy ceramic surface regularly with a mild, non-abrasive cleaner suitable for glazed tile.
- Avoid abrasive pads, harsh chemicals, and cleaning tools that may scratch or dull the finish.
- Wipe away splashes, soap residue, grease, and other buildup promptly.
- Maintain grout joints according to the grout manufacturer’s care and maintenance recommendations.
Disclaimer
Installation conditions vary by project. Stone Market USA recommends that installation be performed by a qualified professional using current manufacturer instructions and applicable industry standards. Coverage and packaging information should be verified before ordering, and all material should be inspected before installation.
