Phase Ecru 12×24 Porcelain Tile Natural Rectified
Calm and contemporary, the Phase Ecru 12×24 porcelain tile brings a refined neutral tone that works effortlessly across a range of interiors. The natural matte surface reads soft and understated, while rectified edges support tight, consistent joints for a clean, modern layout.
Crafted in durable porcelain at a 9mm (3/8") thickness, Phase Ecru balances style with everyday practicality for floors and walls. Its frost-resistant body also opens design options for exterior facades in freeze–thaw climates. Use it as a versatile field tile or as a quiet backdrop to highlight cabinetry, fixtures, and furnishings.
The 12×24 format reduces visual clutter by minimizing grout lines, helping spaces feel larger and more cohesive. Subtle ecru coloring pairs easily with warm woods, brushed metals, and stone accents for timeless appeal.
Features
- Porcelain body for durability and easy care
- Color: Ecru
- Finish: Natural (matte)
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 tile
- Thickness: 3/8 in (9mm)
- PEI 5 wear rating suitable for heavy residential and light commercial floors
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 13.56 sq ft per box | 7 pieces per box
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Phase Ecru 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (e.g., ANSI A108/A118 and TCNA). Verify substrate suitability, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, structurally sound, and flat within tolerances appropriate for 12×24 tile.
- Dry-lay tiles to plan layout, balance cuts, and center patterns where possible.
- Blend material from multiple boxes to distribute any shade or pattern variation.
- Select a joint width appropriate for rectified tile and include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain and for the tile’s size.
- Key mortar into the substrate, then comb with an appropriate notched trowel; back-butter tiles as needed to improve coverage.
- Set tiles with a slight perpendicular motion to collapse ridges and achieve proper bond; meet or exceed coverage requirements for the application and location.
- Use a leveling system when helpful to minimize lippage on large-format installations.
- Allow mortar to cure per manufacturer instructions before grouting or light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade rated for porcelain.
- Mark and support tiles carefully to reduce chipping on narrow or angled cuts.
- Ease sharp cut edges where they may be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; mix and apply per manufacturer guidance.
- Pack joints fully with a rubber float, clean diagonally, and remove residual haze promptly.
- Use appropriate sealants at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout cures.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner approved for porcelain tile; avoid acids and harsh abrasives.
- Use walk-off mats and felt pads to minimize grit and scratching in high-traffic areas.
- Follow grout manufacturer maintenance recommendations; seal cementitious grout if advised.
Disclaimer
Installation should be performed by qualified professionals. Verify actual materials, lot-to-lot variations, and suitability for the intended application prior to installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
