Newton Silver 12×24 Porcelain Tile Natural Rectified
Refined and versatile, the Newton Silver 12×24 porcelain tile delivers a cool, modern look in a soft natural (matte) finish. The 12×24 format reduces visual seams, while precise rectified edges support clean, consistent grout joints for streamlined walls and floors.
Crafted in durable porcelain at 3/8 inch (9.5mm) thickness, Newton Silver balances everyday practicality with design flexibility. A PEI 4 wear rating supports robust residential use and selective light commercial floors, and frost resistance expands design options to exterior facades in freeze–thaw climates.
Use it as a calm, contemporary field tile or mix with coordinating materials to build layered detail. The understated silver tone pairs easily with warm woods, dark metals, and minimalist palettes.
Features
- Porcelain body for durability and easy care
- Color: Silver tone
- Finish: Natural (matte) surface
- Edge: Rectified for precise, narrow grout joints
- Size: 12×24 format
- Thickness: 3/8 in (9.5mm)
- PEI 4 wear rating for robust residential use and light commercial floors
- Frost resistant for freeze–thaw exterior wall applications
- Coverage: 11.62 sq. ft. per box | 6 pieces per box | approx. 1.94 sq. ft. per piece
Recommended Applications
- Residential interior floors
- Residential interior walls
- Light commercial interior floors
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Newton Silver 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Ensure proper substrate preparation, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Confirm the substrate is clean, dry, sound, and flat within tolerances suitable for 12×24 tile.
- Dry-lay to plan layout, balance cuts, and align grout joints; avoid small slivers at perimeters.
- Blend material from multiple boxes to distribute shade and pattern variation.
- Use spacers appropriate for rectified tile; include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain tile.
- Key mortar into the substrate, then comb with an appropriate notched trowel; back-butter tiles as needed to improve coverage.
- Set tiles with a slight back-and-forth motion to collapse ridges and promote bond; achieve coverage per industry requirements for the application.
- Use a leveling system if needed to help minimize lippage on 12×24 installations.
- Allow mortar to cure per manufacturer instructions before grouting or light traffic.
Step 3: Cutting
- Use a wet saw with a premium diamond blade rated for porcelain.
- Measure and mark carefully; support the tile fully during cuts to minimize chipping.
- Ease sharp cut edges where they will be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the chosen joint width; follow manufacturer directions for mixing, application, and cure.
- Fully pack joints with a rubber float; clean diagonally and remove haze promptly with clean water.
- Use appropriate sealant at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner approved for porcelain tile; avoid acids and harsh abrasives.
- Use entry mats and felt pads to reduce tracked-in grit and scratching.
- Follow grout and setting material manufacturers’ maintenance guidance; reseal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot variations, and suitability for the intended application prior to installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
