Bernini Frost 12×24 Porcelain Tile Polished Rectified
Elevate modern spaces with the Bernini Frost 12×24 polished porcelain tile. Its refined, light-toned surface delivers a clean, contemporary look, while the polished finish brings a sophisticated sheen that pairs effortlessly with a wide range of materials and palettes.
Precision rectified edges support tight, consistent grout joints for crisp lines and a seamless aesthetic. Made from durable porcelain with a PEI 4 wear rating, this 9mm (3/8") tile is built for long-term performance and easy maintenance. Frost resistance expands design possibilities to exterior wall applications in freeze–thaw climates.
Use Bernini Frost on its own for a minimal, gallery-like feel or as a bright counterpoint to warm woods and brushed metals. Thoughtfully sized at 12×24, it balances visual impact with versatile layout options across walls and select dry-area floors.
Features
- Material: Porcelain
- Collection: Bernini
- Color: Frost
- Finish: Polished
- Edge: Rectified for precise, consistent joints
- Size: 12×24 (nominal)
- Thickness: 9mm (3/8 inch)
- PEI 4 wear rating
- Frost resistant (suitable for freeze–thaw exterior wall applications)
- Coverage: 11.63 sq. ft. per box | 6 pieces per box | approx. 1.94 sq. ft. per piece
Recommended Applications
- Residential interior walls
- Residential interior floors (dry areas)
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Bernini Frost 12×24 Porcelain Tile Polished Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Confirm substrate suitability, movement accommodation, and required waterproofing/drainage for the intended application.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, sound, and flat within tolerances for tile of this size.
- Plan the layout by dry-laying tiles, centering the design, and avoiding small perimeter cuts where possible.
- Blend tiles from multiple boxes to distribute any shade variation evenly.
- Use spacers appropriate for rectified tile and include movement joints per TCNA EJ171 at changes of plane and perimeters.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain tile.
- Key mortar into the substrate, then comb with an appropriate notched trowel; back-butter tiles as needed to improve coverage.
- Set tiles with a slight back-and-forth motion to collapse ridges; achieve the coverage level required by application and location (commonly 80–95%).
- Use a leveling system if needed to help minimize lippage.
- Allow mortar to cure per manufacturer instructions before grouting or allowing light traffic.
Step 3: Cutting
- Cut with a wet saw using a premium diamond blade suitable for porcelain.
- Mark and support cuts carefully to reduce chipping; ease sharp cut edges where exposed.
- Drill with diamond-core bits at low speed and with adequate cooling if penetrations are required.
Step 4: Joint Filling
- Select a grout appropriate for porcelain and the chosen joint width; follow manufacturer mixing and cure directions.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use suitable sealant at movement joints and changes of plane—do not grout these areas.
- When working with polished surfaces, test grout on a spare piece to confirm it does not scratch or stain.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner approved for porcelain tile; avoid acids, harsh alkalis, and abrasive pads.
- Use entry mats and felt pads on furniture to minimize abrasion from tracked-in grit.
- Follow grout manufacturer maintenance guidance; reseal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot-to-lot variations, and suitability for specific applications before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
