Azuma Ag 12×24 Porcelain Tile Natural Rectified
Streamlined and modern, the Azuma Ag 12×24 porcelain tile features a versatile natural (matte) surface and precise rectified edges for crisp, consistent lines. The 12×24 format reduces grout joints to create a clean, contemporary backdrop across floors or walls.
Engineered in durable porcelain with a PEI 5 wear rating, this tile is designed to handle busy interiors with ease. Its frost resistance expands design options to exterior facades in freeze–thaw climates, delivering durability alongside low-maintenance care.
Use it on its own for minimalist appeal or combine with complementary materials to build layered detail throughout kitchens, baths, living areas, and feature walls.
Features
- Porcelain body for durability and easy maintenance
- Color: Ag
- Finish: Natural (matte) surface
- Edge: Rectified for tight, consistent grout joints
- Size: 12×24 format
- PEI 5 wear rating for heavy residential traffic
- Frost resistant for freeze–thaw exterior wall applications
- Supports clean, modern layouts with reduced grout lines
Recommended Applications
- Residential interior floors
- Residential interior walls
- Commercial interior walls
- Backsplashes
- Shower walls
- Fireplace surrounds
- Exterior walls/facades (freeze–thaw)
Installation Guide – Azuma Ag 12×24 Porcelain Tile Natural Rectified
Important Advisory
Always follow the tile manufacturer’s instructions, local building codes, and recognized industry standards (ANSI A108/A118 and TCNA guidelines). Confirm substrate suitability, movement accommodation, and waterproofing/drainage where required.
Step 1: Layout & Planning
- Verify the substrate is clean, dry, structurally sound, and flat within industry tolerances for 12×24 tile.
- Dry-lay and center the layout to minimize small perimeter cuts and align grout joints with key visual lines.
- Blend tiles from multiple boxes to evenly distribute any shade or pattern variation.
- Plan appropriate joint width for rectified tile and include movement joints per TCNA EJ171.
Step 2: Tile Installation
- Use a polymer-modified thin-set mortar approved for porcelain and the tile size.
- Key mortar into the substrate, then comb with an appropriate notched trowel; back-butter tiles as needed to improve coverage.
- Set tiles with a slight sliding motion to collapse ridges and achieve required coverage (typically 80–95%, depending on area and exposure).
- Use a tile leveling system when appropriate to help minimize lippage with larger formats.
- Protect the installation and allow mortar to cure per manufacturer instructions before grouting or traffic.
Step 3: Cutting
- Cut using a wet saw with a premium diamond blade suitable for porcelain.
- Mark cuts carefully and support the tile fully to reduce chipping.
- Ease sharp cut edges where they may be exposed.
Step 4: Joint Filling
- Select a grout suitable for porcelain and the planned joint width; follow manufacturer mixing and application guidelines.
- Pack joints fully with a rubber float, clean diagonally, and remove haze promptly with clean water.
- Use sealant at movement joints and changes of plane; do not grout these areas.
- Protect the installation from traffic until grout has cured as directed.
Step 5: Cleaning & Maintenance
- Clean routinely with a pH-neutral cleaner approved for porcelain tile; avoid acids and harsh abrasives.
- Use entry mats and protective pads on furniture to minimize abrasion from tracked-in grit.
- Follow grout manufacturer maintenance guidance; seal cementitious grout if recommended.
Disclaimer
Installation should be performed by qualified professionals. Confirm actual materials, lot variations, and suitability for the intended application before installation. Stone Market USA is not responsible for issues arising from improper installation, handling, or site conditions.
